Plastic pulverizer /powder making machine small with good flowability and the high bulk density 22kw

The MF series automatic plastic grinding mill is disk-type plastic grinding mill series, which has the advantages of high-yield and low-power. This machine can be used for powder processing of Polyethylene (PE), Polyvinyl Chloride (PVC), Polypropylene (PP), Polystyrene (PS), ABS, nylon, EVA, PET and other materials.

Advantages

1. The new designed improve 30% of the life. While simplifying the installation steps of disc. The disc is made of SKD11, which is the Japanese tool steel grades and famous in the world.
2. By new designed, the bearing can load high-speed rotation.
3. No need any fixed measures on the ground, and no high demands of ground planeness in the installation of pulverizer. The pulverizer can be put on a normal inner ground.
4. Installation and maintenance of pulverizer is very simple, open the door in the host to clean it up.
5. High degree of automation of operation of the machine makes automatic feeding, discharging and sorting.
6. The grinding process can all be sealed, and no dust pollution and secondary pollution of materials in grinding process.
7. Fineness can be adjusted within 120 mesh conveniently.
8.Host uses water and wind double cooling system which is use of water and air as the cooling medium. It's very economical.

Operating Notes

The operation procedure of the machine is very easy, one operator can make the pulverizer work well. Show you as follow: Starting: Put your raw materials which dimension less than 8mm (hereinafter referred to as granule) into hopper ;

START:

The pulverizer system by the independent control cabinet ; Then open the valve in the hopper and vibration feeder.

STOPPING

Close the valve and vibration feeder, then stop the pulverizing system by the independent control cabinet two minutes later.

Technical Parameters