PLC Control Non Woven Face Mask Making Machine/Medical Mask Making Machine

Maintenance

Scheduled check the main parts ,such as the axletree bearings ,ensure all the bearing lubricating enough.

Scheduled check the welding head mechanical wearing conditions , adjust the pressure to a suitable state , try to adjust the pressure to be minimum at the station of welding well .

Often check the tensile force of the raw material coils ,ensure all the materials running in step & the surface with no laxation.

Please adjust the pressure of the cutting blade to avoid blading damage.

1. PLC control.

2. Photoelectric detection positioning.

3. Printing device optional.

4. Tension control system.

5. Beautiful strong and rustproof with the aluminum alloy structure

Performance Characteristic

We adopt the international advanced technology for this machine , the AL Bar transported by feed cam , the length of the AL Bar can be adjust freely . It also can be added double AL Bars if necessary . And the machine is low power consumption and much lighter .

It is an automatic machine to produce the finished face mask ,and to weld face mask by ultrasonic .From material feeding for produce face mask blank to welding the ear-loop, this machine integrate 1 set face mask bank machine with 2 sets inside ear-loop machine by the mask distribution system ,so that improved its automation. Only 2 person are needed to operate.

As we all know, flat mask consists of mask blank and ear loop. The traditional flat mask machine uses a mask blank machine to produce mask blank, and then uses a inner/outer ear loop machine to weld the ear loop. For achieving a perfect match of the output between mask blank making machine and ear loop welding machine, we need to combine a mask blank making machine with one inner/outer ear loop welding machines so as to maximize the effectiveness of production line.