Laminating Customized Coated Overlay Film With HICO Magnetic Strip For Card Production
Specifications:
Thickness of overlay | 0.04~0.1mm |
Size | Sheet size or Roll size, any size as your requirement |
Classify | HI_CO 2750OE, LO_CO 300OE |
Technical note:
In manufacturing process, it can be directly laminated with PVC printing sheet, simplify the fabrication process, save time, adhesive strength is high.
Steps to make cards:
1.Put printing core and two overlays together, then put into the laminator.(the laminating temperature and time is determined as per the instruction of the machine).Please be noticed that all glue sides of both PVC sheets and Overlays are put inward.
2.Tlamination lasts 10-15 minutes. The pressure is 6-8Mpa.The temperature is 120-140°C.
3.Cutting the card.
It is a overlay sticking magnetic stripe on the surface of coated overlay.As a sample in size A4, there are 5 sheets of magnetic stripe on the overlay. It can be laminated with plastic core to make bank / credit cards.
Notice: As the side without magnetic stripe is with glue for laminating.