Plastic Pellet Dryer CSG Plus 4000 Energy Saving & Low Dew Point Hopper Dryer

CSG 4000 Dehumidifying Dryer

Introduction of CSG

CSG series is a fully automatic drying system with zeolite desiccant beds, which Can be used with Hopper Bank Series and multi-hopper systems. It can adapt and automatically control operating parameters based on type and quantity of polymer.Up to 40% energy saving in comparison with traditional dryers.

Product Description

This series expands CSG standard series maintaining its characteristics while offering increased production capacity.

Its advanced thermodynamics based on Zeolite trible tower design with three desiccant cartridges and three pumps technology: two to process air production and one for saturated tower regeneration.

Feature

1. Automatic start/stop timer one week to improve energy saving.

2. Drying hopper and hopper lid can be fully insulated for high temperature application.

3. Option accessories: euro-hopper suction box, euro-hopper mobile floor stand, material door magnet,

magnetic base(aluminum or stainless steel), blower inlet filter, hot air recycling, exhaust air filter.

4. Europeanization design, double-wall with imported thermal insulation material filled in interlayer,

shorten the heating time and reduce heat loss, therefore saving energy & high efficient.

5. Hot air down-blowing design ensures even distribution of hot air to maintain a steady temperature in the

hopper and increase drying efficiency.

Main Advantages

1.No moving or rotating internal parts.

2.No need of manual control, Full auto-adaptive operation.

3.On-board heating unit on hopper.

4.Diagnostic functions,Dewpoint, heater, and temperature alarm.

5.Visual and audible alarms available.

5.Anti-stress function protecting polymers against overheating.

6.Automatic dew point control system: not switch to new desiccant bed before the dew point gets -30°C.

Dew Point Control

Instead of superficial time control, now we precisely control our pneumatic value on the basis of dew point. It’s the energy consumption solution with highest cost performance.We have the best-matched regeneration control and control the frequence of regeneration according to the moisture content. The most efficient energy consumption, no earlier or longer, just the right time with no waste.

Air volume control ​

According to all the data collected by the system, through ABB frequency converter, we can control fan power and air volume, avoid risk, improve efficiency and save energy! The traditional drye cannot control air volume, which wastes energy, and increases the loss. If air volume is fixed and the fan configuration is not adjustable, the full amount of air must be configured. when the output is not high and the raw material is dry, it is not necessary to have such a large amount of air, so the surplus is wasted.if using ABB inverter, the air volume can be provided on demand, the raw material can be dried uniformly, thus, the finished product quality is guaranteed.