Description of HDPE Siphon Fittings

1)CHUANGRONG High Density Polyethylene HDPE: Density 951 – 955 kg/m3

The density of polyethylene can be 910 – 960 kg / m3. CHUANGRONG fittings and pipes

Weighing 955.29 kg / m3, its characteristics not only have durability. And light weight, very convenient

for transportation and installation.

2)Reduced reversion

Reduce shrinkage and improve installation strength. The HDPE replica produced by CHUANGRONG

manufacturing process is less than 15mm.

3)Resistance to cold

CHUANGRON siphon pipeline has anti-freezing performance. When the water in the pipeline is frozen,

ordinary pipeline will freeze and crack, but CHUANGRONG HDPE will not.

Characteristics of Siphon HDPE Pipe System

1)Heat expansion

The thermal expansion of HDPE also needs to be considered in the design and installation. As a rule

Thumb, for every 50 ° C increase in temperature, 15 mm expansion per meter of pipe

Can be expected.

2)Resistance to hot water

Geberit HDPE allows temperatures up to 100 ° C for short periods of time (such as steam surges), and

can be safely used as wastewater pipes without mechanical load up to 80 ° C.

3) Resistance to impact

CHUANGRONG HDPE is also very suitable for installation in

The parking lot and pedestrian zone are indestructible at room temperature. Its impact resistance is very

high, Even at extremely low temperatures (down to about -40 ° C).

1)Garden project: planting underground garage roof, green roof, soccer fields, golf courses, beach, saline,

desert planting.
2)Construction: basement floor level seepage, construction basis of the upper, lower, basement seepage

level facades,insulation.
3)Traffic engineering: tunnels, roads, railway embankment, dams, slope protection.
4)Municipal Engineering: Metro, road embankment, landfill
5)Renovation: moisture, noise, vibration, threading.