PE PP Spiral Corrugated Plastic Pipe Cable Extrusion Machine Line pvc pipe extrusion process

Pipe Extrusion Production Line Introduction

1. Optimized spiral die ensure the melt distribution uniform to make the pipe wall uniform and guarantee the pipe pressure.

2. Equipped copper Vacuum calibration sleeve with water lubrication ring, twin-chamber vacuum tank with spraying cooling and semicircular Nylon support, to ensure fast calibration, increase the production capacity and lower the operation.

3. These designs are especially good for big diameter pipe production and high speed production.

The basic HDPE / PE Pipe Production Line consists of

1. Color Mixer ( for raw material preparation)

2. Single Screw Extruder

3. Extrusion Mold

4. Vacuum Tank

5. Cooling Tank

6. Haul Off Machine

7. Cutting Machine

8. Stacker ( for 110mm upto 1200mm)

9. Winding Machine ( for pipe diameter 16-63mm and 75-110mm)

10. Shredder and Crusher ( for waste pipe treatment, the recycled PE material could produce pipe again.)

Applications

1. This plastic extruder (conical two screw extruder, conical two-screw extruder, extruder, conical twin-screw extruder) machine is mainly used to process pp, pe, wpc, abs and other plastics.

2. Equipped with auxiliary machines, it can manufacture profile, pipes, sheets and other plastic products and granulation.

3. It has the advantage of simple production technological process, high output, stable quality and low cost.

SJZ Series conical double screw plastic extruders are especially suitable for various pvc powder to extrusion and molding.

4. Equipped with different kinds of molds and auxiliary machines, it can produce various kinds of

pvc pipes, profiles, plates, bars and granulation.

Main advantages

1. Barrier type screw, by which the material can get good plasticizing at low temperature but high extrusion output.
2. Barrel with feeding groove, material is 38CrMoAl and nitrogen treated, surface hardness is HRC 65-68, which can has a long use life.
3. Millipore type mould with suitable inner compression ratio which can guarantee to produce high quality PPR pipes.
4. High automatic level. The production line is controlled by PLC(touch screen). All parts, like extruder, haul off unit, cutter etc can be controlled by touch screen synchronously.

Main Electric Components of our machines

Production Line Detailed Picture