PE PP PS Sheet Extrusion Production Line Single Screw Extruder Plastic Sheet Making Machine

PE PP PS Sheet Extrusion Production Line Extrusion Process

1. Plastic pellets are fed into the barrel of the extruder and conveyed by the screw, the heaters which are outside of the barrel of the extruder as well as the friction from the rotation of the screw melt the plastic pellets into a sheet mold and then placed on a three-roll calender.

2. The produced sheet goes through the bottom and middle roll,wrapping around back of the middle roll and then back to the top roll or other methods as shown in sheet calender picture, these rolls are helpful to take the heat out of the sheet, after the sheet comes off the roll.

3. It moves down the conveyor to the end of sheet line where the edge trimmer cuts the sheet to width as well as a sheet shear cutter to length.

Introduction of Composite PVC stone plastic profile extrusion

Widely used in interior decoration materials ,such as tunnelers,subways,airports ,hotels,entertainment, KTV,shopping malls,hospitals,offices,kitchen bathrooms,home background walls,laboratories and other places,in particular ,it is an ideal material for the wet environment.

Sheet Features

1 . Environment-friendly and reasonable design.

2 . The assembly is sample and application is wide.

PVC Profiles are matching, Multifunctional and interchangeable;then they are assemblied casement window and door,sliding window and door,circular window,enclosed balcony corridor and variety arbitrary windows etc.

3 . Structure is hard and perfermance is perfect.

4. Width: 320-3000mm
5. Thickness: 0.2--20mm
6. Capacity: 150-500kg/hr
7. Mono-layer and multi-layer sheet extrusion system for up to 5 layers
8. Processing capabilities: PE, PP, PS and other thermoplastic materials

Application

1 . Advertisement: such as screen printing, computer lettering, ad board.

2 . Architeture: such as buliding wall board, decoration board, housing, office, public buliding interlayer, commercial decoration shelf, non-dust room board, ceiling plate.

3 . Transportation: such as steamship, aeroplane, carriage, traine compartment, roof shed, case core layer, inner upholster.

4 . Industry: such as chemical industry antisepticizing project, thermoforming , for refrigeratory, for temperature keeping, for environment protection

Composition of Plastic Board/Sheet/Plate Production Line

Product Display