EVA material is mainly made into insoles after foaming, and EVA grinding into powder, then produce, you need to use our company produced EVA800 pulverizer.
EVA800 grinding machine is also widely used, not only can grind EVA, but also to PE, PET, ABS and other materials grinding. Why should we buy EVA800 pulverizer?
1, EVA800 mill speed is the most suitable for EVA work, it can guarantee EVA discharge.
2, because most of the material is the data after foaming, so the small proportion, EVA grinding function of material grinding more fine.
3, the whole machine is equipped with dust removal system, the effect is excellent, will not attack dust and pollution.
4, adequate equipment materials, reasonable plan, useful to reduce noise.
No need to buy the machine , customers are able to find us, we have various types of milling machines, all kinds of material we can handle, only you trust me for giving me this opportunity, Yiming machinery will be your good helper material milling doubt.
Usage
1, With water spray cooling system. it is suitable for processing of thermal sensitive material. With unique water spray cooling system. When the temperature of main machine is higher than setting temperature, water spray automatically until the temperature decreased normally.
Note: less of water spray into to machine will be dryed quickly which will not affect material properties. It can be installed by your requirements.
2, The raw material become power by vibration principle of ultrasonic vortex wave pressure which is from the high speed rotating of main shaft.
The material is conveyed to screening system by wind conveying. The coarse materal is back to the milling chamber automatically, then pulverized again.
3, The blade adopt high quality steel which is treated by heating.after heat treatment, with good abrasion resistance. It is suitable for continuous running.
4, This size of machine is small with compact structure, fully sealed, no dust overflow.
5, The material is transferred based on own wind pressure.
Technical Specification
Type | YMMF-800 | ||
Electricity | 380V/3PHASE/50HZ | ||
Power | Main motor | 75kw | |
Fan | 11kw | ||
Main motor | Rotating motor | Φ810mm | |
Fixed blade | Φ810mm | ||
Feeding | automatic | vibration | |
Colling mode | water | AIR-cooled | |
Rotating speed | minute | 3000rpm | |
Capacity | H | 200-550KG | |
Electrical Equopment
Shaft | contactor1 | delixi | CJX-2-100 220V |
contactor2 | delixi | CJX-2-150 220V | |
SKF | 6319 | ||
Dusting | bag | ||
Protection equipment | High and low voltage protection Overload protection Suction device Dust collecting bag protection with 9 bags |