CO-PET Pellets Dryer machine, plastic dehumidifying dryer,PET Dessicant dryer supplier,plastic dehumidifier dryer

I

Processing Explanation

• Dry and crystallize of amorphous Co-PBT and Co-PET Pellets to 500ppm
• Process temperature 80 °C to 135 °C
• Cooling the pellets to 40°C

(Re-cooling the pellets to avoid the pellets re-moistured )

• Transfer to bagging package

Our IRD ( Infrared Dryer ) will make for you

• Infrared rotary dryer is designed with sophisticated temperature measurement. The material and exhaust air temperature are continuously monitored by sensors. If there is any deviations,PLC system will adjust automatically
• There are flexible 5 zone heating control
• Adopt drum rotation will make sure the constant movement of the raw material to avoid clumping/sticking and dry evenly
• Within 15mins to get the moisture 500ppm or less ( Depends on customer’s requirement)
• To get the crystallization level at 20%-30% of the pellets without lumping/sticking)
• Comprehensive visualization of all process parameters
• Cooling the pellets to 40°C

(Re-cooling the pellets to avoid the pellets re-moistured )

Our Advantage

Low energy consumption.Significantly lower energy consumption compared to conventional processes, through the direct introduction of infrared energy to the product.

Minutes instead of hours.The product remains for only a few minutes in the drying process and is then available for further production steps.

Instantly.The production run can start immediately upon startup. A warm-up phase of the machine is not required.

High efficiency.The energy is immediately brought into the core of the product.

Gently.The material is heated gently from the inside to the outside and not loaded from the outside for hours with heat, and thereby possibly damaged.

Easy cleaning.Good access to all components allows for easy and fast cleaning. Rapid product change-over.

In one step.Crystallization and drying in one step.

Increased throughput.Increase of plant throughput by means of reduced load on extruder.

Evenly.Ensures a constant discharge

How Lianda Infrared dryer to crystallize

HOW TO ENSURE THE QUALITY!

Our Service

1.We will provide testing if the customer comes to visit factory to see the machine.
2.We will provide detail machine technical specification ,electric diagram,installation,operation manual and all the documents which customer needed for clearing customs and using the machine.
3.We will provide engineers for helping installation and training the workers at customer's site.
4.Spare parts are available when they are needed .Within warranty time,we we will provide spare parts free,and over warranty time,we will provide spare parts with factory price.
5.We will provide technical support and repair service in the whole lifetime .