Item

Technical parameter

I. SJ65/25 Single Screw Extruder

Supplier of electric control cabinet

Main transducer and feeder's transducer: Hitachi transducer; Air switch:

Output capacity

80kg/h(approximate)

Inlet wire terminal of power source

3-phase, 4-wire system

Motor power

Main motor:AC30kw

Temperature control curve type

Temperature fluctuating self-adjustment(PID type)

Temperature control meters, manometers and speedometers

RKC(Japan) temperature control system, Xiaogan Wuyue(China) sensor and high quality speedometers respectively.

Pressure display

With melt pressure display

Feeder type

Vacuum feeder(with drier), with enganced screw feeder

Connection of die head with flange

By bolts

The advantages over other companies in this field

Good shearing, high output, reasonable design, high accuracy and easy control, high-grade materials and parts with steadfast performance.

1. Screw

Diameter

65mm

LD

25:1

Quantity

1pcs

With gas vent or not

With

2. Barrel

Barrel type

Integer

Heating method

Air cooling unit. Special stainless cover and red copper electricity heater are used on the barrel

Heating zones

7-zone

Total heating power

60kw(approximate)

Temperature range

50~300

Cooling zones

7-zone

Cooling system

7X0.55kw

Cooling medium

Air cooling

Screw and barrel manufacturer

Zhejiang Machinery Co., Ltd

Quality guarantee

Testing block and tested report are available. Guaranteed period is more than 10,000 working hours

Nitrid depth

0.6~0.7mm

3. Driving system and speed reducing system

Main driving motor power

18.5kw

Main motor working method

3-phase asynchronous motor, connected to the gearbox by couple

Main motor rotating speed

Gearbox type

Helical gear, hardened

Gears

Carburized and ground; The material is 20CrMoTi

Main motor speed-adjusting method

AC transducer

II.Haul-off unit

Haul-off speed

20-30m/min(adjustable)

Speed control method

Inverter

Motor power

0.75kwX2

III. Single disc winder

Winding range

15-25mm

IV. Mould

1 set