37KW PE PP LDPE Films Irregular Particle Making Machine

The film squeezing granulator is the equipment in the film recycling production line. It is used to squeeze the cleaned film material. This machine adopts the principle of squeezing dehydration and is equipped with a rotary screw device to squeeze and dehydrate the plastic film, and clean the plastic film (plastic film PP-PE-PET, plastic agricultural film mulch film, PP woven bag, snake skin bag, empty phthalate bag, A device that squeezes out the water in the plastic after ton bags, thin plastic sheets, waste plastics). Equipped with rotating screw device, hard tooth surface reducer, squeezing and dewatering plastic film, plastic agricultural film mulch, PP woven bag, snake skin bag, empty phthalate bag, ton bag, thin plastic sheet waste plastic, etc. equipment.

Working Principle:

When the waste plastic is supplied into the chamber, it will be cut into smaller chips due to the crushing function of the rotating knife and fixed knife. During the crushing processing, the material that soaked up lots heat from the frictional movement of material being crushing and the wall of container will be going to become semi-plasticizing state. The particles will stick with each other due to the function of plasticization. Before it sticks each other completely, the cold water pre-prepared is sprayed into the material being crushed. The water will be evaporated off quickly and the surface temperature of material being crushed drop down quickly also. So the material being crushed will become small particles or granules. It is easy to recognize the particles by different size and can be colored by using of color agent being putted into the container during the crushing processing.

Main technical parameter:

More Photos of plastic film agglomerator:

We also can supply waste plastic pelletizing line, after agglomerator, it can goes into extruder to make pellets.

three in one, this compactor machine include crush, extrude and pelletizing function. With high efficiency, high output.The compactor with high temperature, make plastics small, and it also have cutter function, meanwhile evaporating water.Single screw extruder can be equipped with exhaust or non-exhaust, pelletizing method, screen changing device etc, according to the characteristics of plastic. Extruder is equipped with pressure sensors. Pressure sensor is used to detect pressure. When it’s time to replace filter screen, warning light will ring.Die-face pelletizing is expected to reduce manpower cost.Dedicated screw and barrel design: The screw is specially designed for recycled materials based on their characteristics. The unique design ensures full degassing in operation

This complete recycling granulating line include below Items:

If you want to know more informations ,welcome to contact with us.