Multi Functional Plastic Washing Recycling Machine With PLC Touch Screen Control

The entire production line of PE PP film washing can easily clean waste plastic products from the start of operations to the finished product. Dirty agricultural films, waste packaging materials or hard plastics are processed step by step here. The main processed materials are PE/PP plastics, PE/PP plastic waste hybrids, waste PP woven bags, plastic bags, household waste plastics, and waste agricultural film.

Plastic Washing Recycling Machine consists of :

• Conveyor belt,
• Crusher with water
• Friction cleaning machine,
• Sedimentation rinse tank,
• Spiral elevator,
• Dewatering machine,
• Duct drying system,
• Silo,
• control panel and other components.

Plastic Washing Recycling Machine Main Technical Parameter

Plastic Washing Recycling Machine Advantage:

• The crusher with water , and User-friendly design blades change , Our blades are all use D2 material ,it is more stronger and durable than SKD-II.
• The final products water content is less than 3%. It can go to extruder directly.
• The film material stretch in the water, with four rollers to stay more time in the water, than the dirty material will be down on the tank, then go into low speed friction machine.

Plastic Washing Recycling Machine Features

1.Suit for Material: PP PE Film/PP PE Bag/PP Woven Bag

2.Final Product size: 30-40mm or striped.

3.Moisture content remain: <5% after use film squeezing machine or film squeezing cutter machine it can go into extruder directly.

Friction washer machine has some advantages in the complete washing line:

• It has friction and washing two functions.
• There is a drainage hole under the machine
• Special screw suit for plastic film, plastic bags material

Strong Crusher machine:

It can crush both plastic film and plastic bags, if you want to crush the strip size, it just change crusher screen is ok.

STPLAS has four size motor of crusher, 22/37/55/75KW motor power. It depend which capacity you needed.

Film squeezing cutter unit

• Due to many customer told the final film Water content can not go to extruder directly , for this problem ,we research and designed film squeezing cutter one unit.
• If you do the final products for yourself , after film squeezing machine can meet it ,the pellets can go to injection machine or other extruder to make your products. But if you want to sell good sale-pellets, you should buy pelletizing machine to make pellets.