10MPA Single Stage 30ML Manual Hydro Test Pump Anti Corrosion

Description

This kind of pressure test pump has the advantages of atmospheric appearance, convenient use and easy operation and maintainance. The pump body and water outlet part are all made of copper parts, which are not easy to rust and have good corrosion resistance. It is suitable for working sites in various harsh environments.

Photo	Model	Pressure	Flow volume	G.W/N.W	Water tank volume	Meas	Note
	EP-50	0-5MPA	30ML	9.7/9.2KG	12L	52.5*20*29cm	Steel plate thickness 2mm Aluminum oxide piston
							Panel thickness 5mm All copper piston
	EP-100	0-10MPA	30ML	9.5/9.0KG	12L	52.5*20*29cm	Steel plate thickness 2mm Aluminum oxide piston
							Panel thickness 5mm All copper piston

You can ask quotation for above info if you need, thanks.

Main Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .

The installation is as below

1. Before using the pressure test pump, check in detail whether the joints of each component are tightened, whether the pressure gauge is normal, and whether the inlet and outlet pipes are installed properly.
2. In order to improve the pressure test efficiency, the container or equipment to be tested can be filled with water first, and then the outlet pipe of the pressure test pump can be connected.
3. During the pressure test, if you find that there is a lot of air in the water, you can open the water valve and let the air out.
4. If any slight water seepage is found during the pressure test, the work should be stopped immediately for inspection and repair, and it is strictly forbidden to continue to increase the pressure in the case of water seepage.
5. After the pressure test is completed, first loosen the water valve, and the pressure will drop to avoid damage to the pressure gauge.
6. When the pressure test pump is not in use, the water in the pump should be drained and a small amount of oil should be sucked in to prevent corrosion.

PACKING
We put pp fittings into nylon bags then cartons outside. We also packed other pipe fittings with plastic bags.

SHIPPING
For sample orders, we can ship it by international express, such as DHL, FEDEX, TNT and China EMS.
For bulk orders, we support air cargo and sea shipping, our factory are near from Shanghai port and Ningbo port, and we can transfer goods to port within 24 hours.

We have many kinds of manual and electrical test pump, if you don't find the one you want, pls feel free to contact us, thanks.

We always provide high quality products and workable price for every clients and have won the trust, enjoy a good reputation in the market.

Machine Quality Guarantee: 12 months.--If any parts broken or does not work under normal operating, we provide them for free.

Our service:

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock.
Q: How about the use of maintenance technology and equipment?
A: We have free test-bed and maintenance and training services for various pressure testing pumps.
Q: Why should I choose your product?
A: We can provide you the best quality and the most competitive price, and we have our own engineer, if you have any requirements
You can contact us directly.