New design Indoor Playground Equipment For Sale With Big Ball Pool And Three Big Plastic Slide In line

Materials:

Plastic

All plastic components retain their properties in the temperature range of -30°C to 60°C. All plastic materials are UV and ozone protected to the maximum within the frames of the strongest environmental demands. Only plastic materials and additives in compliance with the EN 71 standard are used.

Wood

Wood is harvested from plantations with sound re-forestation programs. The variety of wood is

specially selected for use in playgrounds, which are made of good quality pine ( Pinus Sylvestris ), full-squared, planed, with rounded edges and without dead knots. Pressure impregnated with Tanalith E according to EN 351-1 and EN 335-2 under carefully controlled conditions to ensure minimal environmental impacts.

Metal

All metal parts are dimensioned for heavy-duty, industrial application. Types of metal used

are steel, stainless steel. All joints above the ground are screws or bolted joints. To protect steel parts against corrosion, they are all subjected to one of the following basic treatments:

· Hot-dip galvanising (all fabrication prior to galvanisation ).

· Electro-coating of paint (EC-painting)

· Wet painting after EC-painting

· Powder coating

FAQ

1. How to maintain and clean the indoor playground?

Maintenance: Everyone should take off his shoes when entering the indoor playground; the EVA mat must be avoided to step by shoes with high heels.

Cleaning: Use cleaning rag to clean the surface of the indoor playground periodically.

2. If I have an indoor playground of 100 square meter, how many kids can be accommodated at one time?

Normally, one square meter space can accommodate 1-2 children. So 100 square meter indoor playground can accommodate to 100-200 children at one time.

3. Are there any limits about the height? How high do you usually make? Will it be dangerous if we make it higher than the normal?

The height depends on the area size of your place. We must leave 30cm from the ceiling. Normally, we make two floors 2.8m while three floors

4.1m.If we have the space to make it higher, it’s also possible and won’t be dangerous

4. How long does it take to get a plan or design ? How about the production time?

It depends on the size of your playground. Take a 100m2 indoor playground as an example, It takes 2-3days to finish an initial design and about 15days for production. If you have a large or complex project, it may take a bit longer.

5. How much will your indoor playground cost ?

As the indoor playground is always custom designed and involves many products and accessories, the price has to be calculated based on the final design.