MR-J2S-100A 3-Phase 200 to 230VAC Servo Drive
Control system | Sine-wave PWM control, current control system |
Dynamic brake | Built-in |
Protective functions | Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal relay), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage, instantaneous power failure protection, overspeed protection, excessive error protection |
Max. input pulse frequency | 500kpps (for differential receiver), 200kpps (for open collector) |
Command pulse multiplying factor | Electronic gear A:1 to 65535 131072 B:1 to 65535, 1/50 A/B 500 |
In-position range setting | 0 to 10000 pulse (command pulse unit) |
Error excessive | (Note) 2.5 revolutions |
Torque limit | Set by parameter setting or external analog input (0 to 10VDC/maximum torque) |
Speed control range | Analog speed command 1: 2000, internal speed command 1: 5000 |
Analog speed command input | 0 to 10VDC / Rated speed |
Speed fluctuation ratio | 0.01% or less (load fluctuation 0 to 100%) 0% (power fluctuation 10%) 0.2% or less (ambient temperature 25 10 (59 to 95 )), when using analog speed command |
Zhinian have large range of stock quantity ,we would shop out the products within 1 or 2 days after payment .If you need special help,we would try our best to help you.We are shipping the goods to every country of the world! Our shipping method such as DHL , Fedex, UPS and so on.