Beckhoff EL4032 EtherCAT Terminal, 2-Channel Analog Output, Voltage, ±10 V, 12 Bit
The EL4032 analog output terminal generates signals in the range between -10 and +10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common ground potential. The EL4032 combines two channels in one housing. The output stages are powered by the 24 V supply. The signal state of the EtherCAT Terminal is indicated by light emitting diodes.
Technical data
Technical data | EL4032 |
Connection technology | 2-wire, single-ended |
Number of outputs | 2 |
Power supply | 24 V DC via power contacts |
Signal voltage | -10…+10 V |
Distributed clocks | yes |
Distributed clock precision | << 1 µs |
Load | > 5 kΩ (short-circuit proof) |
Output error | < 0.1 % (relative to end value) |
Resolution | 12 bit |
Electrical isolation | 500 V (E-bus/signal voltage) |
Conversion time | ~ 150 µs |
Current consumption power contacts | typ. 40 mA |
Current consumption E-bus | typ. 140 mA |
Bit width in the process image | 2 x 16 bit AO output |
Special features | Optional watchdog: user-specific output value with ramp; user synchronization can be activated. |
Weight | approx. 55 g |
Operating/storage temperature | -25…+60 °C/-40…+85 °C |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
Protect. rating/installation pos. | IP20/variable |
Pluggable wiring | for all ESxxxx terminals |
Approvals/markings | CE, UL, ATEX, IECEx |
Ex marking | ATEX: |
II 3 G Ex ec IIC T4 Gc | |
IECEx: | |
Ex ec IIC T4 Gc |
Housing data
Housing data | EL-12-8pin | ES-12-8pin |
Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
Material | polycarbonate | |
Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
Side by side mounting by means of | double slot and key connection | |
Marking | labeling of the BZxxx series | |
Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
Connection cross-section | s*: 0.08…2.5 mm², | s*: 0.08…1.5 mm², |
st*: 0.08…2.5 mm², | st*: 0.08…1.5 mm², | |
f*: 0.14…1.5 mm² | f*: 0.14…1.5 mm² | |
Connection cross-section AWG | s*: AWG 28…14, | s*: AWG 28…16, |
st*: AWG 28…14, | st*: AWG 28…16, | |
f*: AWG 26…16 | f*: AWG 26…16 | |
Stripping length | 8…9 mm | 9…10 mm |
Current load power contacts | Imax: 10 A |