Model | LR-W500C |
Type | M12 connector 4-pin type |
Detecting distance | 30 to 500 mm 1.18" to 19.69" |
Min. spot diameter | Adjustable spot Approx. ø3.5 mm at 100 mm ø0.14" at 3.94" Approx. ø9 mm at 250 mm ø0.35" at 9.84" Approx. ø18 mm at 500 mm ø0.71" at 19.69" |
Light source | White LED |
Mutual interference reduction function | Up to 2 units when alternate frequencies set |
Timer | OFF/ON delay/OFF delay/One-shot |
Response time | 200 µs/1 ms/10 ms/100 ms/500 ms selectable *1 |
I/O | Control output | NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, remaining voltage: 2 V or less N.O./N.C. selectable *2 |
External input | Tuning /Transmission OFF selectable Short circuit current: 1 mA or less for NPN/2 mA or less for PNP For the applied voltage, see the wiring diagrams in the instruction manual. For the input times, see the time charts in the instruction manual. *2 |
Protection circuit | Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection |
Power supply | Power voltage | 10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS |
Current consumption | 65 mA or less (without load) at 24 VDC; 120 mA or less (without load) at 12 VDC *3 |
Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) |
Ambient light | Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less |
Ambient temperature | -20 to +50 °C -4 to 122 °F (No freezing) |
Relative humidity | 35 to 85 % RH (No condensation) |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions |
Shock resistance | 1,000 m/s2, 6 times in each of the X, Y, and Z directions |
Material | Case: Zinc die cast (Nickel chrome plating), Indicator cover: PPSU, Buttons: PES Lens cover and display: PMMA (scratch-resistant coating), Spot adjustment dial: Iron (triiron tetraoxide coated) Connector ring: PMP, Connector socket: PEI |
Weight | Approx. 110 g |