The Signet Rear Enclosure Kit allows the 9900 Transmitter to be mounted just about anywhere. The design features make it suitable for installations onto walls, pipes, struts or inside panels. There are two kits available, Rear Enclosure with Hinged cover or with Flat cover. Kits can be installed on any generation of the 3-9900-1P Panel Mount Transmitter. They can also be used with the 3-9900-1BC Batch Controller System.
The hinged cover version is suitable for wall or pipe mount installations. The kit is equipped with necessary wall mounting hardware. Plastic tie wraps or metal hose clamps (customer supplied) can be used for pipe mount installations. Two slots are available up to 12.7 mm (0.5 in.) wide. The hinged cover design allows for easy access to the back of the 9900 Transmitter for wiring and module installation. The user can install the hinged door to swing down, up or side-to-side.
Features
Applications
3-2100-1H | 3-2726-LC-10 | 3-2820-1 | 3-9950.398-2 | 3-9950.394-2 |
3-2819-S1 | 3-2725-60 | 3-8510-P0 | 3-2350-3-1 | 3-9950.393-1 |
3-8051 | 3-4150.382 | 3-3719-11 | d22-115mm | 3-2536-P1 |
3-8350-2 | 3-9900-1P | 3-2774-1 | P51530-T1 | 3-8550-2 |
3-2820-T1 | 3-9900.394 | P525-2S | M1538-4 | 3-2750-1 |
3-2450-3L | 3-2818-1 | 3-8058-1 | 3-2819-1 | 3-2551-P0-12 |
3-8050-2 | 3-9900-1BC | 3-2551-T1-11 | 3-8050-1 | 3-2726-LC-00 |
3-2759 | 3-2734-00 | 3-2551-P1-12 | 3-3719-21 | 3-2736-00 |
3-2759.391 | 3-2735-60 | 3-2551-P2-12 | 3-2450-7U | 3-2850-52-39V |
3-8150-P0 | 3-9900.398-1 | 3-2551-T0-12 | 3-2450-7U | P51550-3 |
3-2551-P0-12 | 3-0252 | 3-2551-T1-12 | 3-2450-7H | P525-1S |
3-2250-11U | 3-2850-52-40V | 3-2551-P1-22 | P525-2S | 3-2724-10 |