Retroreflective sensor ML100-55/95/103 | |||||||||||||||||||||||||||||||||
Technical Data | |||||||||||||||||||||||||||||||||
General specifications | |||||||||||||||||||||||||||||||||
Effective detection range | 0 ... 5 m | ||||||||||||||||||||||||||||||||
Reflector distance | 0.02 ... 5 m | ||||||||||||||||||||||||||||||||
Threshold detection range | 7 m | ||||||||||||||||||||||||||||||||
Reference target | H50 reflector | ||||||||||||||||||||||||||||||||
Light source | LED | ||||||||||||||||||||||||||||||||
Light type | modulated visible red light | ||||||||||||||||||||||||||||||||
Polarization filter | yes | ||||||||||||||||||||||||||||||||
Diameter of the light spot | approx. 500 mm at a distance of 7 m | ||||||||||||||||||||||||||||||||
Opening angle | approx. 4 ° | ||||||||||||||||||||||||||||||||
Optical face | frontal | ||||||||||||||||||||||||||||||||
Ambient light limit | EN 60947-5-2:2007+A1:2012 | ||||||||||||||||||||||||||||||||
Functional safety related parameters | |||||||||||||||||||||||||||||||||
MTTFd | 860 a | ||||||||||||||||||||||||||||||||
Mission Time (TM) | 20 a | ||||||||||||||||||||||||||||||||
Diagnostic Coverage (DC) | 0 % | ||||||||||||||||||||||||||||||||
Indicators/operating means | |||||||||||||||||||||||||||||||||
Operation indicator | LED green: power on | ||||||||||||||||||||||||||||||||
Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted | ||||||||||||||||||||||||||||||||
Control elements | sensitivity adjustment | ||||||||||||||||||||||||||||||||
Control elements | Light-on/dark-on changeover switch | ||||||||||||||||||||||||||||||||
Electrical specifications | |||||||||||||||||||||||||||||||||
Operating voltage | UB | 10 ... 30 V DC | |||||||||||||||||||||||||||||||
Ripple | max. 10 % | ||||||||||||||||||||||||||||||||
No-load supply current | I0 | < 20 mA | |||||||||||||||||||||||||||||||
Output | |||||||||||||||||||||||||||||||||
Switching type | The switching type of the sensor is adjustable. The default setting is: light-on | ||||||||||||||||||||||||||||||||
Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | ||||||||||||||||||||||||||||||||
Switching voltage | max. 30 V DC | ||||||||||||||||||||||||||||||||
Switching current | max. 100 mA , resistive load | ||||||||||||||||||||||||||||||||
Voltage drop | Ud | ≤ 1.5 V DC | |||||||||||||||||||||||||||||||
Switching frequency | f | 1000 Hz | |||||||||||||||||||||||||||||||
Response time | 0.5 ms | ||||||||||||||||||||||||||||||||
Conformity | |||||||||||||||||||||||||||||||||
Product standard | EN 60947-5-2 | ||||||||||||||||||||||||||||||||
Approvals and certificates | |||||||||||||||||||||||||||||||||
UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure | ||||||||||||||||||||||||||||||||
CCC approval | CCC approval / marking not required for products rated ≤36 V | ||||||||||||||||||||||||||||||||
Ambient conditions | |||||||||||||||||||||||||||||||||
Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) | ||||||||||||||||||||||||||||||||
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | ||||||||||||||||||||||||||||||||
Mechanical specifications | |||||||||||||||||||||||||||||||||
Degree of protection | IP67 | ||||||||||||||||||||||||||||||||
Connection | Connector M8 x 1 , 4-pin | ||||||||||||||||||||||||||||||||
Material | |||||||||||||||||||||||||||||||||
Housing | PC (Polycarbonate) | ||||||||||||||||||||||||||||||||
Optical face | PMMA | ||||||||||||||||||||||||||||||||
Mass | approx. 10 g | ||||||||||||||||||||||||||||||||
Tightening torque, fastening screws | 0.6 Nm | ||||||||||||||||||||||||||||||||
Dimensions | |||||||||||||||||||||||||||||||||
Height | 31 mm | ||||||||||||||||||||||||||||||||
Width | 11 mm |