Application | ||||||||||||||||
Application | hygienic systems | |||||||||||||||
Media | viscous media and liquids with suspended | particles; | liquids and | gases | ||||||||||||
Medium temperature | [°C] | -25...125; (145 max. 1h) | ||||||||||||||
Pressure rating | 30 bar | 3000 kPa | 435 psi | |||||||||||||
Min. bursting pressure | 100 bar | 10000 kPa | 1450 psi | |||||||||||||
Type of pressure | relative pressure | |||||||||||||||
No dead space | yes | |||||||||||||||
Electrical data | ||||||||||||||||
Min. insulation resistance [MΩ] | 100; (500 V DC) | |||||||||||||||
Protection class | III | |||||||||||||||
Reverse polarity protection yes Integrated watchdog yes | ||||||||||||||||
2-wire | ||||||||||||||||
Operating voltage | [V] | 20...32 DC | ||||||||||||||
Current consumption | [mA] | 3.6...21 | ||||||||||||||
Power-on delay time | [s] | 1 | ||||||||||||||
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PI2715-00 — 08.09.2016 | ||||||||||||||||
PI2715 | ||||||||||||||||
Combined pressure sensor | ||||||||||||||||
PI-006-REA01-MFRKG/US/ /P | ||||||||||||||||
3-wire | ||||||||||||||||
Operating voltage [V] | 18...32 DC | |||||||||||||||
Current consumption | [mA] | < 45 | ||||||||||||||
Power-on delay time [s] | 0.5 | |||||||||||||||
Inputs / outputs | ||||||||||||||||
Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | |||||||||||||||
Outputs | ||||||||||||||||
Total number of outputs | 2 | |||||||||||||||
Output signal | switching signal; analogue signal; IO-Link; (configurable) | |||||||||||||||
Electrical design | PNP/NPN | |||||||||||||||
Number of digital outputs | 2 | |||||||||||||||
Output function | normally open / normally closed; (parameterisable) | |||||||||||||||
Number of analogue outputs | 1 | |||||||||||||||
Analogue current output [mA] | 4...20, invertible; (scalable) | |||||||||||||||
Short-circuit protection | yes | |||||||||||||||
Type of short-circuit protection | pulsed | |||||||||||||||
Overload protection | yes | |||||||||||||||
2-wire | ||||||||||||||||
Max. load [Ω] | 300 | |||||||||||||||
3-wire | ||||||||||||||||
Max. voltage drop switching output DC | [V] | 2 | ||||||||||||||
Permanent current rating of switching output DC | [mA] | 250 | ||||||||||||||
Switching frequency DC | [Hz] | 125 | ||||||||||||||
Max. load | [Ω] | (Ub - 10 V) / 20 mA | ||||||||||||||
Measuring/setting range | ||||||||||||||||
Measuring range | -1...6 bar | -100...600 kPa | -14.5...87 psi | |||||||||||||
Set point SP | -0.99...6 bar | -99...600 kPa | -14.4...87 psi | |||||||||||||
Reset point rP | -1...5.99 bar | -100...599 kPa | -14.5...86.9 psi | |||||||||||||
Analogue start point | -1...4.5 bar | -100...450 kPa | -14.5...65.3 psi | |||||||||||||
Analogue endpoint | 0.5...6 bar | 50...600 kPa | 7.3...87 psi | |||||||||||||
Insteps of | 0.005 bar | 0.5 kPa | 0.1 psi | |||||||||||||
SP1 = 1.5 bar | rP1 = 1.38 bar | |||||||||||||||
Factory setting | SP2 = 4.5 bar | rP2 = 4.380 bar | ||||||||||||||
ASP = 0.0 bar | AEP = 6.0 bar | |||||||||||||||
Accuracy / deviations | ||||||||||||||||
Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) | |||||||||||||||
Repeatability | [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) | ||||||||||||||
Characteristics deviation | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) | |||||||||||||||
[% of the span] | ||||||||||||||||
Linearity deviation | < ± 0,15; (Turn down 1:1) | |||||||||||||||
[% of the span] | ||||||||||||||||
Hysteresis deviation | < ± 0,15; (Turn down 1:1) | |||||||||||||||
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PI2715-00 — 08.09.2016 | ||||||||||||||||
PI2715 | ||||||||||||||||
Combined pressure sensor | ||||||||||||||||
PI-006-REA01-MFRKG/US/ /P | ||||||||||||||||
[% of the span] | ||||||||||||||||
Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) | |||||||||||||||
Temperature coefficient zero point [% of the span / 10 K] | < ± 0,05; (0...70 °C) | |||||||||||||||
Temperature coefficient span | < ± 0,15; (0...70 °C) | |||||||||||||||
[% of the span / 10 K] | ||||||||||||||||
Response times | ||||||||||||||||
Damping for the switching output dAP | [s] | 0...30 | ||||||||||||||
Damping for the analogue output dAA | [s] | 0.01...99.99 | ||||||||||||||
2-wire | ||||||||||||||||
Step response time analogue | [ms] | 45 | ||||||||||||||
output | ||||||||||||||||
3-wire | ||||||||||||||||
Min. response time of | [ms] | 3 | ||||||||||||||
switching output (dAP) | ||||||||||||||||
Step response time analogue | [ms] | 7 | ||||||||||||||
output | ||||||||||||||||
Interfaces | ||||||||||||||||
Communication interface | IO-Link | |||||||||||||||
Transmission type | COM2 (38,4 kBaud) | |||||||||||||||
IO-Link revision | 1.0 | |||||||||||||||
IO-Link device ID | 728 d / 00 02 d8 h | |||||||||||||||
Profiles | no profile | |||||||||||||||
SIO mode | yes | |||||||||||||||
Required master port type | A | |||||||||||||||
Process data analogue | 1 | |||||||||||||||
Process data binary | 2 | |||||||||||||||
Min. process cycle time [ms] | 2.3 | |||||||||||||||
Operating conditions | ||||||||||||||||
Ambient temperature [°C] | -25...80 | |||||||||||||||
Storage temperature [°C] -40...100 Protection IP 67; IP 68; IP 69K | ||||||||||||||||
Tests / approvals | ||||||||||||||||
EN 61000-4-2 ESD | 4 kV CD / 8 kV AD | |||||||||||||||
EN 61000-4-3 HF radiated | 10 V/m | |||||||||||||||
EMC | EN 61000-4-4 Burst | 2 kV | ||||||||||||||
EN 61000-4-5 Surge | 0,5/1 kV | |||||||||||||||
EN 61000-4-6 HF conducted | 10 V | |||||||||||||||
Shock resistance | DIN IEC 68-2-27 | 50 g (11 ms) | ||||||||||||||
Vibration resistance | DIN IEC 68-2-6 | 20 g (10...2000 Hz) | ||||||||||||||
MTTF [years] | 154 | |||||||||||||||
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PI2715-00 — 08.09.2016 | ||||||||||||||||
PI2715 | ||||||||||||||||
Combined pressure sensor | ||||||||||||||||
PI-006-REA01-MFRKG/US/ /P | ||||||||||||||||
Mechanical data | ||||||||||||||||
Weight | [g] | 358.5 | ||||||||||||||
Materials | stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA | |||||||||||||||
Materials (wetted parts) | ceramics (99.9 % Al2O3); PTFE; stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4 | |||||||||||||||
Min. pressure cycles | 100 million | |||||||||||||||
Process connection | threaded connection G 1 external thread Aseptoflex Vario | |||||||||||||||
Displays / operating elements | ||||||||||||||||
Display | Display unit | LED, green | ||||||||||||||
switching status | LED, yellow | |||||||||||||||
function display | alphanumeric display, 4-digit | |||||||||||||||
measured values | alphanumeric display, 4-digit | |||||||||||||||
Display unit | bar; kPa; psi; % of the span | |||||||||||||||
Remarks | ||||||||||||||||
Pack quantity | 1 pcs. | |||||||||||||||
Electrical connection | ||||||||||||||||
Connector: 1 x M12; Contacts: gold-plated |