Product:Allen-Bradley 1771-IMD AC (220V) Input Module

Rockwell 1771IMD

This module must be used with a 1771 Series B I/O chassis. If you are using a 1771–ASB remote I/O adapter you may use any combination of I/O modules. Otherwise, make sure no other input module or single card block transfer module is placed in the same I/O group. This module contains input filtering to limit the effects of voltage transients caused by contact bounce and/or radiated electrical noise. The delay due to filtering is listed in the Specifications section.

Your module receives its power through the 1771 I/O chassis backplane from the chassis power supply. The module requires 250mA from the output of this supply. Add this to the requirements of all other modules in the I/O chassis to prevent overloading the chassis backplane and/or backplane power supply

Connections to the input module are made to the 21 terminal field wiring arm (cat. no. 1771–WH) shipped with the module. Attach the wiring arm to the pivot bar on the bottom of the I/O chassis. The wiring arm pivots upward and connects with the module so you can install or remove the module without disconnecting the wires.

Recommended Products:

1771-CAE
1771-CAP
1771-CAP3
1771-CAPA
1771-CAPR
1771-CAPR3
1771-CAS
1771-CD
1771-CE
1771-CFM
1771-CFMK
1771-CLL
1771-CP1
1771-CP2
1771-CP3
1771-CT
1771-CT45
1771-CT50
1771-CX1
1771-CX10
1771-CX15
1771-CX2
1771-CX20
1771-CX25
1771-CX30
1771-CX5

Products Pictures:

These are our advantage brands:

Bently Nevada / ABB / Allen-Bradley / ICS / TRICONEX / Honeywell / Foxboro / GE / Siemens / Moore / Emerson / Ovation / Westinghouse / Epro / Yokogawa / Yaskawa / Schneider / HIMA / B&R / Woodward / ZNYX

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series