Metal Parts Mirror Finish Vibrating Vibro Polish Machine

Specifications:

1. Structure:

ZYD Vibratory finishing machine is composed of inertial vibrator, vessel, electrical cabinet and basement.

Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.

Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of workpieces on vessel. (For VBA series, there is a separator on the vessel to seperate the workpieces from the stones. )

Electrical cabinet: Operate the machine by buttons on the control panel.

Basement: It is weld of steel, and it has springs to hold the vessel.

2. Function:

ZYD Vibratory finishing machines are suitable for deburring, descaling, edge radiusing, chamfering, polishing, surface improvement, pre plating finishing all types of components including fully machined parts in metals & plastics

3. Working Principle

TONZZE Vibratory Finishing Machine for Metal Working has a ring chamber to hold abrasives (stones) and workpieces. When the machine is working, it makes three-D high frequency vibration. The grinding stones and the workpieces are rolling spirally forward and they are grinding each other during the rolling. This makes the workpieces de-burred, chamfered, polished and clean. To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.

4. Packing details.

TONZZE Vibratory Finishing Machine is firmly packed in a plywood case in a whole. And the machine will be wrapped with thin films to protect the outside paint from scraping.

Applications:

Mainly applied to metal parts, standard parts, apparatus, instruments, bicycles, sewing machines, hydraulic parts, bearings, auto parts, plastics, ceramics, non-ferrous metal products and parts industry deburring parts to rust, polishing rough, medium polished , fine polishing, bright polishing. Especially for special-shaped parts of the surface finishing are superior to specific functions, as it after finishing the parts, does not destroy the original shape and position accuracy, and improved surface quality, high-volume parts for use in surface finishing processing.

Competitive Advantage:

1.Competitve price & good quality
2.CE&ISO9001certificated
3.Low cost & long working life