GC-B Roller Type Freewheel One Direction Clutch
Production introduction
Complete Freewheels FB are sealed sprag freewheels with ball bearings. They are supplied
oil-filled and ready for installation. The freewheels FB are used as:
Backstops
Overrunning Clutches
Indexing Freewheels
In addition to the standard type, four other types are available for extended service life and
indexing accuracy. Nominal torques up to 160 000 Nm. Bores up to 300 mm. Many standard bores areavailable.
Application example
Two Complete Freewheels FB 82 SFT as overrunning clutches in the drive of an edge trimming shear in a wide strip roll train. When trimming the edges of the strip, the trimming
rollers are driven by the drive of the edge trimming shear. By doing so, the two freewheels work in driving operation. As soon as the sheet they pull the strip at an increased speed and the inner rings overrun the slower turning drive of the edge trimming shear. By doing so, the
freewheels work in freewheeling operation. The RIDUVIT sprags lend the freewheels an extended service life.
Mounting
The customer attachment part is on the external diameter D and then bolted on to the face.
The tolerance of the shaft must be ISO h6 or j6 and the tolerance of the pilot diameter D of the
attachment part must be ISO H7 or J7.
Example for ordering
Freewheel size FB 72, type with sprag lift-off Z and 38 mm bore:
• FB 72 LZ, d = 38 mm
When ordering freewheel size FB 340 and FB 440, please also specify the freewheeling direction of the inner ring when viewed in direction X:
• counterclockwise free or
• clockwise free
Products Parameters
Freewheel Size | Type | Nominal torque MN | Max speed | Type | Nominal torque MN | Max speed | Type | Nominal torque MN | Sprag lift-off at inner ring speed | Max speed | Type | Nominal torque MN | Sprag lift-off at inner ring speed | Max speed | Type | Nominal torque MN | ||||
Inner ring freewheels /overruns | Outer ring freewheels /overruns | Inner ring freewheels /overruns | Outer ring freewheels /overruns | Inner ring freewheels /overruns | Outer ring drives | Outer ring freewheels /overruns | Inner ring drives | |||||||||||||
Nm | min-1 | min-1 | Nm | min-1 | min-1 | Nm | min-1 | min-1 | min-1 | Nm | min-1 | min-1 | min-1 | Nm | ||||||
FB24 | CF | 45 | 4800 | 5500 | CFT | 45 | 4800 | 5500 | CFP | 19 | ||||||||||
FB29 | CF | 80 | 3500 | 4000 | CFT | 80 | 3500 | 4000 | CFP | 31 | ||||||||||
FB37 | SF | 200 | 2500 | 2600 | SFT | 200 | 2500 | 2600 | CZ | 110 | 850 | 3000 | 340 | SFP | 120 | |||||
FB44 | SF | 320 | 1900 | 2200 | SFT | 320 | 1900 | 2200 | DX | 130 | 860 | 1900 | 344 | CZ | 180 | 800 | 2600 | 320 | SFP | 180 |
FB57 | SF | 630 | 1400 | 1750 | SFT | 630 | 1400 | 1750 | DX | 460 | 750 | 1400 | 300 | LZ | 430 | 1400 | 2100 | 560 | SFP | 310 |
FB72 | SF | 1250 | 1120 | 1600 | SFT | 1250 | 1120 | 1600 | DX | 720 | 700 | 1150 | 280 | LZ | 760 | 1220 | 1800 | 488 | SFP | 630 |
FB82 | SF | 1800 | 1025 | 1450 | SFT | 1800 | 1025 | 1450 | DX | 1000 | 670 | 1050 | 268 | SFZ | 1700 | 1450 | 1600 | 580 | SFP | 750 |
FB107 | SF | 2500 | 880 | 1250 | SFT | 2500 | 880 | 1250 | DX | 1500 | 610 | 900 | 244 | SFZ | 2500 | 100 | 1350 | 520 | SFP | 1250 |
FB127 | SF | 5000 | 800 | 1150 | SFT | 5000 | 800 | 1150 | SX | 3400 | 380 | 800 | 152 | SFZ | 5000 | 1200 | 1200 | 480 | SFP | 3100 |
FB140 | SF | 10000 | 750 | 1100 | SFT | 10000 | 750 | 1100 | SX | 7500 | 320 | 750 | 128 | SFZ | 10000 | 950 | 1150 | 380 | SFP | 6300 |
FB200 | SF | 20000 | 630 | 900 | SFT | 20000 | 630 | 900 | SX | 23000 | 240 | 630 | 96 | SFZ | 20000 | 680 | 900 | 272 | SFP | 12500 |
FB270 | SF | 40000 | 510 | 750 | SFT | 40000 | 510 | 750 | UX | 40000 | 210 | 510 | 84 | SFZ | 37500 | 600 | 750 | 240 | SFP | 25000 |
FB340 | SF | 80000 | 460 | 630 | SFT | 80000 | 460 | 630 | ||||||||||||
FB440 | SF | 160000 | 400 | 550 | SFT | 160000 | 400 | 550 |
Freewheel Size | Bored Standard | Max. | D | F | G** | H | L | T | Z** | Weight | ||||
mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | kg | |||
FB24 | 12 | 14* | 14* | 62 | 1.0 | M5 | 8 | 50 | 51 | 0.9 | ||||
FB29 | 15 | 17* | 17* | 68 | 1.0 | M5 | 8 | 52 | 56 | 3 | 1.1 | |||
FB37 | 14 | 16 | 18 | 20 | 22* | 22* | 75 | 0.5 | M6 | 10 | 48 | 65 | 34 | 1.3 |
FB44 | 20 | 22 | 25* | 25* | 90 | 0.5 | M6 | 10 | 50 | 75 | 6 | 1.9 | ||
FB57 | 25 | 28 | 30 | 32* | 32* | 100 | 0.5 | M8 | 12 | 65 | 88 | 6 | 2.8 | |
FB72 | 35 | 38 | 40 | 42* | 42* | 125 | 1.0 | M8 | 12 | 74 | 108 | 1 | 5.0 | |
FB82 | 35 | 40 | 45 | 50* | 50* | 135 | 2.0 | M10 | 16 | 75 | 115 | 12 | 5.8 | |
FB107 | 50 | 55 | 60 | 65* | 65* | 170 | 2.5 | M10 | 16 | 90 | 150 | 10 | 11.0 | |
FB127 | 50 | 60 | 70 | 75* | 75* | 200 | 3.0 | M12 | 18 | 112 | 180 | 12 | 19.0 | |
FB140 | 65 | 75 | 80 | 90 | 95* | 250 | 5.0 | M16 | 25 | 150 | 225 | 12 | 42.0 | |
FB200 | 110 | 120 | 120 | 300 | 5.0 | M16 | 25 | 160 | 270 | 16 | 62.0 | |||
FB270 | 140 | 150 | 400 | 6.0 | M20 | 30 | 212 | 360 | 18 | 150.0 | ||||
FB340 | 180 | 240 | 500 | 7.5 | M20 | 35 | 265 | 450 | 24 | 275.0 | ||||
FB440 | 220 | 300 | 630 | 7.5 | M30 | 40 | 315 | 560 | 24 | 510.0 |