HR-1/2-D-MIDI-E Pressure regulators 1/2" White Body With pressure gauge

Description

1.Also suitable for front panel mounting

2.Two pressure gauge connections for different fitting options

3.Good regulating characteristics with minimal pressure hysteresis

4.Two pressure regulation ranges: 0.5 … 7 bar and 0.5 … 12 bar

5.Setting values are secured by locking the rotary knob

6.Return flow option for venting from output 2 to input 1

7.Pressure sensor (optional) → 52

8.High flow rate

Care and maintenance
If a condensate level of approx.10mm below the filter element is reached:

●Open the bleeder screw by turning it in an anti-clockwise direction (see from below).The condensate can then flow out.

●Replace the filter element in time and do as follows:
-Exhaust the system and the regulator.

-Turn the filter bowl in an anti-cdockwise direction.

-Reft the individual parts (hold the new filter element only at the lower end).
Commission again in accordance with the chapter "Commissioning"
●Observe dust prevention,please use covering in the connector while the unitea is free.
●Use only the specified cleaning agents for cleaning:
-Water or soap suds (max.+60℃);
-Petroleum ether (free of aromatic compounds).

Standard Specification

Sectional view

After-sale service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.

Quality Standards
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.