Silvery White Two Way Two Way Operator Solenoid Stem Used For Pneumatic Device

Shape design

1.This item is similar to the BAPC213035506.They are in same specification except their type. BAPC213035506 is a three way two position solenoid stem,this item is a two way two positon solenoid stem/solenoid Armature.And only has two ports.The top of this item isn't solid,BAPC213035506 is solid.

2.With the male screw thread as a conncetion.In the middle of the armature,there is the smooth surface with no skin needling.

3.Also Threaded circular seat to connect the solenoid coil/solenoid valve

4.Only has one side NBR seal.Top of the plunger

NBR:has good resistance to mineral oils, vegetable oils, benzene/petrol, ordinary diluted acids and alkaline.

5.With external spring to provide the spring force.There are four grooves,too.But the vent is smaller than BAPC213035506.

Vent application:Exhausting air out when the valve is not powered.Then protect the whole Solenoid armature safety and maintence the high precision/accuracy

6,Also the bottom shape of the plunger is similar to the fan.Save the material and decrease the cost

Two way Two way solenoid stem/armature assembly Advantage

1.Since direct acting valves rely solely on the electromagnetic power of the solenoid, these types of valves work best for smaller flow rate. One of the benefits to using these is that they only need to use full power when opening the valve. Once the valve is open, these valves can hold the open position even when operating on low power.

2.Solenoid valves are the most frequently used control elements in fluidics. Their tasks are to shut off, release, dose, distribute or mix fluids. They are found in many application areas. Solenoids offer fast and safe switching, high reliability, long service life, good medium compatibility of the materials used, low control power and compact design.

The principle of solenoid plunger assembly

A solenoid valve is an electromechanical device in which the solenoid uses an electric current to generate a magnetic field and thereby operate a mechanism which regulates the opening of fluid flow in a valve.

Overall dimension for the detail analysis

1.Tube OD:13.0mm

2.Tube Height:35.5mm

3.Movable core height:30.2mm

4.Depth of armature:28.2mm

5:Item weitht:69g

6:voltage:AC/DC

Application about this item

Mainly used for the pneumatic solenoid valve or relevant industry

By changing the shape and the specification.

Solenoid Valve also can be used in:

Our factory show and payment

We have more than 10 years experience in manufacturing solenoid stem. Excellent quality control is one of our main principles. Our design, producing and testing are strictly complied with ISO9001 standard. Now our products of solenoid armature assembly are being exported all over the world. We provide OEM service, accept customer label, develop the product with your drawings or samples .If you have any question, contact us, we will be reply with prompt speed.