Irrigation System Plastic Water Solenoid Valve 1'' 1.5'' 2'' 3'' 9V 12V 24V DC
Product Features:
1. Manual switch can control valve on/off when emergency of no electricity power.
2. The valves is installed with filter mess and flow regulator.
3. IP65 coil and low power consumption coil are available.
This plastic irrigation solenoid valves are commonly used in automatic irrigation systems. It has two working types of normally closed and normally open. The orifice ranges from 20mm to 50mm and various pipe sizes are available, which is 3/4’’ , 1”, 1-1/2”, 2”, 3''. One obvious feature for DN25 to DN50 is that it has flow switch to control the flow rate and manually control when there is emergency of power off.
Main Dimension of Irrigation Solenoid Valve:
Model | A | B | C |
BA2120 | 112mm | 82mm | 120mm |
BA2125 | 112mm | 87mm | 120mm |
Model | A | B | C |
BA1125 | 140mm | 83mm | 184mm |
BA1140 | 172mm | 89mm | 203mm |
BA1150 | 235mm | 127mm | 254mm |
BA1180 | 230mm | 160mm | 255mm |
Technical Data of Irrigation Solenoid Valve:
Model | BA1125 | BA1140 | BA1150 | BA1180 | BA2120 | BA2125 |
Orifice Size | 25 | 40 | 50 | 80 | 20 | 25 |
Port Size | 1'' | 1 1/2'' | 2'' | 3'' | 3/4'' | 1'' |
CV | 12 | 25 | 45 | 100 | 9 | 12 |
Working Pressure Range | 0.1MPa to 1.0 MPa | |||||
Coil Voltages | Standard Coil: 220V AC, 110V AC, 24V AC (50/60Hz), 24V DC, 12V DC Latching Coil: DC9-20V, Pulse Width (20 to 500mSec) | |||||
Diaphragm Material | NBR | |||||
Body Material | Plastic Nylon | |||||
Manual Flow Regulator | With | Without |
Brando Factory Production of Solenoid Valves:
More Solenoid Valves for you to choose:
1. According to Body Material: Brass Solenoid Valve, Stainless Steel Solenoid Valve, Plastic Solenoid Valve
2. According to Valve Operation: Direct Acting Solenoid Valve, Semi Direct Acting Solenoid Valve, Pilot Operated Diaphragm Valve, Pilot Operated Piston Valve.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!