Water Purifier Reverse Osmosis System RO Solenoid Valve 1/4'' 24V

Quick Details:

1. Widely used for Reverse Osmosis (RO) Water Purifying Systems
2. Interface mode: Fast plug-in interface, suitable for outer diameter 1/4" plastic pipe, can be inserted directly
3. Aquariums, water dispensers, pure water machine, milk tea machine, commonly used RO machine, pipe machine, new type drinking water equipment all can use.
4. Can automatically control opening or closing of water dispenser
5. Made of food-grade POM plastic, 100% non-toxic and durable in use, high heat & flame resistant

Normally, solenoid valves for RO water purifiers (reverse osmosis systems) are of 2/2 way (1 inlet, 1 outlet of the open/closed type), ideal for water ON/OFF control. This RO solenoid valve uses a plunger to open and close an orifice, which either prevents or allows the flow of a medium. This plunger opens and closes by moving up and down by the use of an electromagnetic field generated by a magnet. As it does not use a membrane, the flow is restricted according to the orifice size. Normally this is between 1mm to 5mm. As the type of valves is direct acting, they do not depend on system pressure differences to function. This makes them ideal for the low flow, small, medium and high-pressure systems up to 120 psi. Port sizes range from 1/8'' to 3/8''.

Dimension & Data of RO Solenoid Valves:

Applications for RO Solenoid Valves:
1. Point of Use (POU) Drinking Water Systems
2. Home RO Systems
3. Commercial RO Systems
4. Point of Entry (POE) Water Filtration Systems
5. Office
6. Institutions
7. Lab
8. Water Purification
9. Ice Makers
10. Beverage Dispensing
11. Vending
12. R.V.

More RO Quick Fittings For you to choose:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!