Push Fitting Type Water Purifier Reverse Osmosis RO Solenoid Valve
BPV05-F Reverse osmosis Filter elements for home drinking water. Inlet solenoid valve for RO water purifier filter. also called as RO Solenoid valve.
Advanced Filter technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on Healthy elements are shipped dry for convenient handling and long shelf-life.
What is the function of solenoid valve in water purifier?
A solenoid valve uses a plunger to open and close an orifice, which either prevents or allows the flow of a medium. This plunger opens and closes by moving up and down by the use of an electromagnetic field generated by a magnet.
Technical data:
Characteristic | 1)Direct acting,0 rated bar pressure.low power 2)compact design to save the space |
Medium | Air,water,steam,oil,etc. |
Temperature | NBR: -10°C to 80 °C EPDM: -10°C to 120 °C FKM:-10°C to 150 °C |
Pressure | 0-1.6Mpa |
Port Size | 1/4'' |
Port Thread | G, NPT |
Orifice | 2.5mm |
Voltage | DC-12V,24V AC-24V,120V,110V,220V/50HZ |
Voltage Range | ±10% |
Material | Body-Nylon,PP,POM Amature tube-stainless steel 304 Plunger-stainless steel430F Stop-stainless steel 430F Springs-SS304 Shading rings- stainless steel 304 |
Main Dimension of RO Solenoid Water Valve:
Brando Factory Production of Solenoid Valves:
More Plastic Reverse Osmosis Solenoid Valve(RO SV):
Reverse Osmosis systems
A simple reverse osmosis system consists of a high-pressure pump which increases the pressure of the feed water with salts, ions or impurities. This forces the water across the semi permeable RO (Reverse Osmosis) membrane, leaving behind all the dissolved salts. The required pressure is directly proportional to the salt concentration of the inlet water. The higher the concentration, the higher pressure is required to overcome the osmotic pressure.
The RO membrane lets the cleaner water through and this is called permeate water. The salts and other contaminants which are stopped by the membrane come out as a reject stream. This can be drained out or recycled if possible through the RO system to save water.
The RO systems remove up to 99% of dissolved salts (ions), particles, pathogens and bacteria from feed water.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!