DC/AC 4V320-08 1/4'' Solenoid Valve For Double Acting Pneumatic Cylinder

4V pneumatic solenoid valve has five threaded holes, three on one side and two on the other. The larger one in the middle of the three holes is the air intake hole, and the air inlet hole is connected to the triple piece (note that the triple piece is directional). The two holes are vent holes, and the vent hole only needs to be equipped with a muffler. can. The other two holes on the other side are the working holes, which are the two holes on the front and rear end caps of the cylinder, so that they are basically assembled. Maintain the continuous airflow, and adjust the pressure of 4-5MPA through the pressure regulating valve to control the piston of the cylinder to reciprocate by energizing and de-energizing the solenoid valve.

Technical data chart of DC/AC 4V320-08 1/4'' pneumatic solenoid valve:

Valve body pictures of 4V320-08 5 port 2 position pneumatic air solenoid valve:

Inlet,Outlet & Vent Pictures of 4V320-08 double acting pneumatic solenoid valve:

Production Environment of 4V320-08 electro pneumatic solenoid directional control valve:

Double-acting cylinder with 4V double coils pneumatic solneoid valves:

The double-acting cylinder is a solenoid valve that requires a two-position five-way. A pneumatic connector, PU tube is required to connect these components. Which type of fiber is selected depends on the screw hole on the cylinder or solenoid valve. Two-position five-way solenoid valves are usually used with double-acting pneumatic actuators. Two positions are controllable: on-off, five-way is five-channel ventilation, one of which is connected to the air supply, two and two The inlet and outlet ports of the external air chamber of the cylinder are connected, and the two are connected with the inlet and outlet ports of the internal air chamber. The specific working principle can refer to the working principle of the double-acting pneumatic actuator.

In the gas path (or liquid path), the two-position three-way solenoid valve has one intake hole (connected to the intake air source), one air outlet (provided to the target equipment air source), and one exhaust hole ( Generally, a muffler is installed, and if it is not afraid of noise, it can be installed. The two-position five-way solenoid valve has one intake hole (connected to the intake air source), one positive action air outlet and one reverse action air outlet (one positive and one reverse action air supply respectively for the target device), 1 A positive action vent and a reverse vent (with a muffler installed).

Welcome to your inquiry!