TS 2 068Z3400 R404A/R507 Danfoss Type Thermal Expansion Valve TS2
Thermostatic Expansion Valve uses a valve mechanism to control the flow of liquid refrigerant into the evaporator coil. The flow is controlled by the pressure in the evaporator.
This type of metering device is able to operate well when the load fluctuates and hence is suitable for use in air conditioning system. When the evaporator warms, the valve provides a higher flow rate amd when it cools, it reduces the flow rate.
It is also commonly refer to as TXV, TEV or TX valve. There is a sensing bulb which detects the temperature of the coil and is usually located at a higher temperature within the evaporator.
The bulb must be clamped firmly to the coil to ensure proper sensing. When the temperature of the evaporator increases due to the demand for cooling, the pressure in the bulb will also increase hence pushing the spring to open the valve.
Similarly, when the temperature of the evaporator reduces due to a lack of demand for cooling, the pressure in the bulb will drop hence causing the spring to close the valve.
Technical Data of T2/TE2 Thermal Expansion Valve:
Ordering Code of T2/TE2 Thermal Expansion Valve:
Capacity of T2/TE2 Thermal Expansion Valve:
Dimension of T2/TE2 Thermal Expansion Valve:
More Refrigeration Parts for you to choose:
![]() | ![]() | ![]() |
Refrigeration Solenoid Valve | Reversing Valve | Refrigeration Ball Valve |
![]() | ![]() | ![]() |
Hot Gas Bypass Valve | Crankcase Pressure Regulator | Sight Glass |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!