UD-10 2W040-10 3/8 Inch 2/2 Way NC Direct Acting Flow Control Valve
2W040-10
2W: 2 Positon 2 Way Solenoid Valve. Solenoid valve has 2 pipe connections, an inlet called the cavity port and an outlet called the body orifice port. When the valve is energized the plunger opens allowing media to flow through the valve in the cavity port and out the body orifice port.Turn off the power. The orifice closes and flow through the valve stops.
40: The Aperture of Flow Rate is 4 mm
10:Joint Pipe Bore is G3/8 Inch Female Thread
2W Series Model No:2W025-08, 2W040-10, 2W160-15, 2W200-20, 2W250-25, 2W500-50
UD Series Model No:UD-6, UD-8, UD-10
UW Series Model No:UW-10, UW-15, UW-20, UW-25, UW-35, UW-40, UW-50
Dimension of 2W/2S Water Solenoid Valve :
Technical Data:
Product Features:
1. UW series is direct, multiplex, connected diaphragm, conductive and normally closed (NC) 2/2 way solenoid valve;
2. Able to be operated directly under low pressure;
3. Availability of fluid type:water, air, light oil;
4. Diaphragm accept for customization NBR, Viton, Silicone and EPDM.
Brando Factory Production of Brass Solenoid Valves:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any problem and inquiry!