MachineU > China Products > Machinery > Machinery Accessories > Pneumatic Parts
High Speed Pneumatic Diaphragm Pump For Combustible And Volatilizable Liquids
High Speed Pneumatic Diaphragm Pump For Combustible And Volatilizable Liquids
Specifications
Brand Name :
BSK
Model Number :
BSKA80AL-PTT-A
Place of Origin :
China
MOQ :
10 Unit(s)
Price :
Negotiable
Payment Terms :
FOB T/T
Supply Ability :
1000 Unit(s) Per Month
Delivery Time :
10
Packaging Details :
woods
Guarantee: :
one year
production :
Pneumatic Diaphragm Pump
Maximum outlet pressure :
0.83mpa
feature :
Non leakage
application :
Combustible And Volatilizable Liquids
Description

High Speed Pneumatic Diaphragm Pump For Combustible And Volatilizable Liquids

What are Pneumatic Diaphragm Pump ?

These are pumps without any electrical motor and run with an air pressure ranging from 1.3 to 8.0 bar. They are simple to run with minimum maintainance cost and down time. All type of liquids can be pumped. Only the MOC and capacity of pumps will vary depending on application and buyer requirements. Sizes vary from 1/4" to 3" and they are available in PP, PVDF, SS & Aluminium Models.

Item Description Unit Reference Figure
1 Maximum air inlet pressure Mpa 0.83
2 Maximum flow rate L/Min 903
3 Maximum lift M 70
4 Maximum outlet pressure Mpa 0.83
5 Maximum particle size mm 9
6 Weight kg 103
7 Noise level db ＜70

Specifications

Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium
4. Material:Cast steel,Alu,SS,PP

A 50 X X - X X X - X (model selection)

Form of pipe mouth:A-BSP B-NPT(F) C-Flange

Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene

Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal

Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel

Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon Steel P/K –Polypropylene/Kynoar

Maximum Applied Temperature Limits (diaphragm / ball / seal material)

Acetal ··············································· 40°- 150°F (4.4- 65.5°C)

Santoprene··········································-40°- 225°F (-40°- 107.2°C) ················································ ·40°- 220°F (4.4°- 104°C) Nitrile·················································10°- 180°F (-12°- 82°C) Viton···················································-40°- 350°F (-40°-176.6°C) Hytrel··················································-20°-150°F (-12°- 93°C) Kynar···················································10°-200°F (-28.9°- 65.5°C) Polypropylene·········································32°- 175°F (0-79.4°C)

Application

1, Poisonous, combustible and volatilizable liquids.
2, Strong acid, strong alkali liquids with corrosion
3, Tanker truck, bilk plant, load and unload of oil products
4, Pickle, fruit pulp, mashed potatoes, chocolates, etc
5, Paint, rubber, pigment and adhesives
6, Various ceramic pulp, grouting, mortar and slurry
7, Various latex, organic solvents, stuffing
8, Stripping of oil carrier (pump dirty water and residual oil)
9, Common hop, thin paste of yeast power, syrup and molasses
10, Special liquid

General Description

Requirements for Air and Lubrication

High Speed Pneumatic Diaphragm Pump For Combustible And Volatilizable LiquidsEXCESSIVE AIR PRESSURE. Can cause pump damage, personal injury or property damage.

  • A filter capable of filtering out particles larger than 50 microns should be used on the air supply. There is no lubrication required other than the “O” ring lubricant which is applied during assembly or repair.
  • If lubricated air is present, make sure that it is compatible with the “O” rings and seals in the air motor section of the pump.

Maintenance

  • Please refer to the component schematic in the assembly drawings to look up the serial numbers and names of parts and grasp the information of parts and maintenance service pack.
  • Some BSK parts are marked as "wearing parts", which can conduce to quick service and downtime reduction.
  • Service kits are divided to service two separate diaphragm pump functions: 1. AIR SECTION, 2. FLUID SECTION. The FLUID SEC -TION is divided further to match typical part MATERIAL OPTIONS.
  • Provide a clean work surface to protect sensitive internal moving parts from contamination from dirt and foreign matter during service disassembly and reassembly.
  • Keep good records of service activity and include pump in preven -tive maintenance program.
  • Before disassembling, empty captured material in the outlet man -ifold by turning the pump upside down to drain material from the pump.

FLUID SECTION DISASSEMBLY

  • Remove the upper and lower manifold (1) and (11).
  • Remove the ball (2), “O” ring (3) (47) and ball seat (4).
  • Remove the fluid cap (5).

NOTE: Only diaphragm models use a primary diaphragm(6A) and a backup diaphragm(6). Refer to the aux iliary view in the Fluid Section illustration.

  • Remove the screw (10), washer (9), diaphragm (6A, 6) and diaphragm washer (7, 8).
    NOTE: Do not scratch or mar the surface of (23) diaphragm rod.

FLUID SECTION REASSEMBLY

  • Reassemble in reverse order.
  • Clean and inspect all parts. Replace worn or damaged parts with new parts as required.
  • Lubricate (23) diaphragm rod and 25) “Y” ring with grease.
  • Fix the diaphragm rod (23) with the auxiliary installation tool.
  • Prior to the final fastening of bolts and nuts, please determine whether the diaphragm (6A,6) is aligned with the fluid cap (5) properly to avoid the twisting of the diaphragm.
  • For the models using diaphragm: three rubber diaphragms (6) on the side, which are marked with AIRS SIDE "air chamber" are mounted in face of the pump body.
  • Start the pump, check the fastening and sealing after it runs for a period of time
Product tags

small chemical pump

,

pneumatic chemical pump

,

pneumatic liquid pump
Send your message to this supplier
Send Now

High Speed Pneumatic Diaphragm Pump For Combustible And Volatilizable Liquids

Ask Latest Price
Product Detail
Brand Name :
BSK
Model Number :
BSKA80AL-PTT-A
Place of Origin :
China
MOQ :
10 Unit(s)
Price :
Negotiable
Payment Terms :
FOB T/T
Contact Supplier
High Speed Pneumatic Diaphragm Pump For Combustible And Volatilizable Liquids

BOGEN PUMPS

Verified Supplier
7 Years
guangdong, foshan
Since 2001
Business Type :
Manufacturer, Importer, Exporter
Main Products :
Air Driven Double Diaphragm Pump, Pneumatic Diaphragm Pump, Air Operated Diaphragm Pump
Total Annual :
100000-300000
Employee Number :
>200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Pneumatic Diaphragm Pump
MachineU China Products Machinery Machinery Accessories Pneumatic Parts
Contact Supplier
Submit Requirement