Boat Lift Airbags application introduction

Boat Lift Airbags is to use the high bearing capacity of the Airbags to lift the ship from the slipway, so that there is a large space between the ship and the slipway, convenient to place the launching air bag, so as to make the ship launch smoothly.

Boat Lift Airbags production requirements are very strict, must adopt the overall winding process, the thickness of the general to reach 10 layers.

The whole winding process refers to the hanging rubber cord from the beginning to the end of a whole hanging rubber cord, does not allow any lap, splicing process; Each layer is wound to form a cross wound, and the cross Angle is 45°

Preparations for launching a ship:

1. Clear and clean the sharp objects such as iron on the berth to avoid scratching the Marine airbag and causing unnecessary losses.

2. Place the Marine airbag at the bottom of the ship at a predetermined distance and inflate it. Obact the rising state of the ship and the pressure of the Airbags at any time.

3. After inflating all Marine airbags, check the state of the air bags again, check whether the ship is balanced, and check whether the berth is clean and tidy.

4. The most important thing for the ship to use the Airbags to launch is the stern first, and the stern first introduces the water surface; If it had gone the other way, the propeller at the back of the boat would have scraped the Airbags, causing a safety accident.

Airbags characteristics:

Marine airbag to water is an innovation technology with independent intellectual property rights in China, is a very promising new process, it overcomes the small and medium-sized shipyard ship ever repaired the ability to slide, slide the restriction of traditional craft, because has the characteristics of less investment, quick effect, safe and reliable, get the welcome of the shipbuilding industry.

Ship hoisting gasbag and scroll Airbags as the main tool that will ship retainer on the balloon, from shipbuilding and ship repairing field into waters or migrate ashore from the water, using the Marine rubber airbag low inflation pressure, large bearing area and the characteristic of the still easy rolling after large deformation, use hoisting gasbag first ship lift from the block, on the scroll Airbags, and then through the rolling traction and airbag, make the ship slowly slide into the water.

According to its innovative technology, Qingdao beierte ship has designed and produced a new type of integrated winding high strength Marine launching airbag, thus providing the most effective guarantee for the large ship launching airbag process.

Marine Airbag Performance:

Specification and dimensions of Marine launching airbag

Marine Airbag fittings

Marine airbag case picture