2P025-06 1/4'' Inch Air Control Plastic Pneumatic Solenoid Valve
Quick Detail:
* 2P Series Plastic solenoid valve flow aperture size 2.5mm
* Two position two way directly acting
* Body material Reinforced plastic steel
* Port Size G1/8”,G1/4”
* Seal NBR,EPDM,VITON for option
* Compact design,small volume,flexible installation
* Fast respond,low noise,low consumption
* Stable design,long serive life
Applications:
2P series two position two way solenoid acting as on and off switch function automatically for its working system by the involving of power electricity magnetic.
2P
Technical Data of 2V Series Pneumatic Solenoid Valves:
Specifications:
ORDERING CODE | |||||
2P | 025 | 06 | V | AC220V | W |
Type | Aperture Flow Rate | Port size | Seal Material | Voltage | Electricity Connect Type |
2V:2V Series two position two way solenoid valve | 025:2.5mm | 06:G1/8" | Blank:NBR | DC12V | W:Out-lead Wire |
08:G1/4" | DC24V | ||||
130:13mm | 10:G3/8" | E:EPDM | AC24V | ||
15:G1/2" | AC110V | D:Din Connector | |||
250:25mm | 20:G3/4" | V:VITON | AC220V | ||
25:G1" | AC380V |
Model | 2P025-06 | 2P025-08 |
Working Medium | Air,Water,Oil,gas | |
Motion Pattern | D irect Drive Type | |
Type | Normal Close Type | |
Aperture of Flow Rate(mm) | 2.5 | |
CV Value | 0.23 | |
Joint Pipe Bore | 1/8″ | 1/4″ |
Operation Fluid Viscosity | 20 CST (Below) | |
Working-pressure | 0~0.7 MPa | |
Max. Pressure Resistance | 1.0 MPa | |
Operating Temperature | -5~80℃ | |
Voltage Range | ±10% | |
Material of Body | Engineering Plastic | |
Material of Oil Seal | NBR or VITON |