Sc Series Double Acting Type Pneumatic Air Cushioning Cylinder

Pneumission Air Cylinder

1) Material of body: Aluminum or Stainless Steel
2) Release rings: oval shape or round;
3) Color of release rings: blue, black, green, yellow or other colors;
4) Seals: NBR
5) Working Temperature:-5ºC to 70ºC
6) Working pressure:0-0.9Mpa
7) Cylinder types available: standard cylinder, micro cylinder, compact cylinder, mini cylinder, guide-shaft cylinder etc.
8) Can do private labels

Caution

1. The compatibility of the product is the responsibility of the person who designs the equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific equipment must be decided by the person who designs the equipment or decides its specifications based on necessary analysis and test results. The expected performance and safety assurance of the equipment will be the responsibility of the person who has determined its compatibility with the product. This person should also continuously review all specifications of the product referring to its latest catalog information, with a view to giving due consideration to any possibility of equipment failure when configuring the equipment.

2. Use cylinders within the piston speed range.
An orifi ce is set for this cylinder, but the piston speed may exceed the operating range if the speed controller is not used. If the cylinder is used outside the operating speed range, it may cause damage to the cylinder and shorten the service life. Adjust the speed by installing the speed controller and use the cylinder within the limited range.

3. Pay attention to the operating speed when the product is mounted vertically.
When using the product in the vertical direction, if the load factor is large, the operating speed can be faster than the control speed of the speed controller (i.e. quick extension). In such cases, it is recommended to use a dual speed controller.