Passive POE Combiner (Injector and Splitter) is also called Multiplexer, Simple type POE injector

POE-IJ806

General Specification:

Power Supply Mode: Direct Feeding=Plug and supplying power, supplying power directly without advanced detection for Power Device (PD)­; Support 100M network transmission

­­Input voltage: DC 5-52V

Input Current: Depends on connected device

Output voltage: It is equal to input voltage

Output Current: Max. 2000mA (Depends on adopted power adapter)

Product Description

POE related products transfer the Vcc and GND via two pairs of 8 lines in UTP, it transfer data while delivering power, reliable product, easy to install. The terminal at AP connected network only via a RJ45 network cable, delivering data and power at the same time, it’s easy to manage.

Power Status Indicating Function

We add a function “Power Status Indicating” on POE module, and deploy an “AP Active” LED indicator on the front panel, it indicates whether the AP is powered by the POE device, which make convenience for technician engineers to see if POE and AP are working properly when they are setting up the network in installation.

Reduce cost of device and management

As AP usually require uninterrupted power source/supply (UPS), all AP will be powered protectively by only one UPS towards POE device terminal, which will greatly reduce the cost of network construction. Employing POE device will reduce the quantity of fitted UPS, which avoid the allocating of power sockets beside each AP, finally greatly reduce the cost of device and management.

Current Limiting Function

Current limitation in each POE and power surge absorption on voltage are also available, which come together ensuring reliable power quality, reducing customers’ investing money as much as possible, maximizing the security assurance of AP equipment, etc.

Customizable POE module

Large bulk capacitance and various superior quality device are adopted in our module product, which ensuring its working stability and high dielectric strength. AP in different specification will be powered in different voltage range (±5V, ±12V, ±24V and ±48V) accordingly.

Different input voltage (± 5V, ± 12V, ± 24V, ± 48V) are supported for various specifications of AP accordingly.)

Compatibility

It’s compatible with Intel PRO 2011, CISCO 350/1200, AGERE AP-2000, Colubris CN3000/30 and other mainstream/popular/alternative AP.

Primary Characteristics

This series of POE module is a power source equipment base on providing power supply for wireless AP (Access Point) via UPT (Unshielded Twisted Pair) network cable

Easy and simply to install, It can be easily fixed on wall by self-tapping screw, it also can be easy to be fixed on wall via double faced adhesive tape if no fly-lead; It requires not necessary professional knowledge of POE module for operator to install quickly.

It provides better solution for power supply, and save the cost by providing handy installation instead of unnecessary wiring in complex surrounding environment.

No need power sockets allocated nearby AP, improve the flexibility of network arrangement, greatly simplifies the installation and allocation of wireless network, directly provide power supply for wireless AP via network cable, provide a good solution for installing AP in where there is no power supply.

Superior quality components and many/a number of steady flow circuit allocated in product come together ensuring the stability and reliability of equipment working.

Technical Specification

Passive POE

Wireless Access Point usually be restricted by the power access, which will not give play to its flexible network arrangement, Power over Ethernet towards wireless device that in a way improve the situation, TP-LINK wireless AP support Passive PoE, users can find a power access point to make convenience for wireless networking.

POE Combiner Connecting Diagram:

The power adapter should meet the power consumption of Powered Device and required transmission distance

The following connecting solution apply to POE Device (network device that power directly by POE function that plug and supplying power)

The following connecting solution apply to Non-POE network device

The following two POE convertors work as combiner and splitter of Power& Data separately