POE-S424
24 Port 10/100Mbps IEEE802.3af/at POE Switch
2 Port Gigabit Copper RJ45 and 2 SFP Slot Combo Uplinks
8.8Gbps Backplane Bandwidth, 400W Built-in Power Supply
Standard Power Over Ethernet Characteristics
Protocol Standard
|
IEEE802.3af
|
IEEE802.3at
|
Max.Current
|
350mA
|
600mA
|
PSE Output Voltage
|
44~57V DC
|
44~57V DC
|
PSE Output Power
|
<=15.4W
|
<=30W
|
PD Input Voltage
|
36~57V DC
|
42.5~57V DC
|
PD Max. Power
|
12.95 W
|
25.5 W
|
Required Cable Standard
|
CAT5, CAT5e, CAT6 or Better
|
CAT5, CAT5e, CAT6 or Better
|
POE-S424, 24 Port Channels Web-managed 10/100Mbps Power Over Ethernet Switch, which comes with 2 Gigabit RJ45 ports and 2 Gigabit SFP Slot ports Uplink. It is compliance with IEEE802.3at and IEEE802.3af down compatible. When it comes to the cost, POE-S424 is surely a perfect choice for multi-channels Ethernet Power transmission, it may say it's an integration of Network Switch and Power Source Equipment for low powered devices (PD) such as Wireless Access Point (AP), Voice over Internet Phone (VoIP), IP Digital Camera and other IP based device. Each PoE port output can be assigned maximum 15.4 watts by its POE PSE internal 400 watts power supply adapter.
There is a typical feature for this 24 Ways PoE Switch that is Power Classication, which is a necessary part of a start-up process before running a PoE connection, the terminal connected PD can be distinguished and detected its power class on POE PSE (Power Sourcing Equipment) which indicates how much power it requires to run regularly. Here are the Power Classification form
Class | Usage | Classification Current (mA) | Power Range (Watt) |
0 | Default | 0~4 | 0.44~12.94 |
1 | Optional | 9~12 | 0.44~3.84 |
2 | Optional | 17~20 | 3.84~6.49 |
3 | Optional | 26~30 | 6.49~12.95 |
4 |
Valid for 802.3at devices, Not allowed for 802.3af devices |
36~44 | 12.95~25.5 |
This Power Classification is an optional stage of starting running power procedure, it is to save cost by reducing energy consumption. In additional, the POE will cut the power when the PD is overloading, underpowering or other issues due to incorrect installation.
Main Features
1. 24 10/100Mbps Web-Smart PoE output ports, 2 Port Gigabit SFP and 2 Port Gigabit RJ45 Combo Uplinks
2. Conform to IEEE 802.3f/at protocol standard
3. Total amount 400W PoE Output, Maximum 30W output in a single PoE port
4. Each PoE switch port support auto-negotiation-10/20, 100/200Mbps, 1000/2000Mbps (Gigabit)
5. Support MAC address auto-learning and auto-aging
6. Half-duplex/Full-duplex: Avoid packet loss with back pressure and IEEE 802.3x PAUSE frame flow control
7. High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
8. Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
9. On/Off power switch, 8.8 Gbps Switching Capacity
10. Web-based IP address 192.168.2.1
Detailed Specification
Item: 24 Port Power Over Ethernet Switch
Model: POE-S424
Network Interface
- 24 10/100M ports (MDI/MDIX adaptive) with PoE features
- 2 10/100/1000M Gigabit copper RJ45 ports (MDI/MDIX adaptive)
- 2 SFP GBIC fiber module slots
Power Supply
- Power Input: 100 - 240 VAC, 50 -60 Hz, 440W, 48VDC/9.2A
- Power consumption: maximum 390W
Protocol Standard
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x Flow Control
- IEEE 802.3af Power over Ethernet
Electromagnetic radiation
- CE mark
- FCC Part 15 Class A
- VCCI Class A
Environmental Requirements
- Operating Temperature: 0 °C - 50 °C (32 °F - 104 °F)
- Storage Temperature: -20 °C - 70 °C (-4 °F - 158 °F)
- Operating Humidity: Max.90% Non-Condensing
- Storage Humidity: Max.95% Non-Condensing
- Operating Height: up to 10,000 feet (3,000 meters)
- Storage Altitude: Max.10,000 feet (3,000 meters)
- Each Device: Input Power Supply, Output PoE Power
- Each Port Gigabit, Transfer Speed
- Each PoE port: PoE power-on LED
Primary Performance
- Forwarding modes: Store and forward
- Bandwidth: 8.8 Gbps (non-blocking)
- Network Latency: (100~100M bps): Max 20 Microseconds(64Byte)
- Buffer memory: 3Mb per system
- Addressing: 48-bit MAC address
- Address database size: 8,000 per system MAC address
- Mean failure interval (MTBF): 300,000 hours (about 34 years)
Dimension: 440mm×290mm×44mm; Weight: 5 kg
Warranty: One year
Package Contents
- 24 port POE Switch
- Optional Power Cord
- Datasheet
- "L" Rackmount Brackets
Interface |
24 10/100Mbps PoE RJ45 Ports(1~24) 2 10/100/1000Mbps RJ45 Ports(25-26) 2 10/100/1000 Mbps SFP+Extending port(25-26) |
Standards |
IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at |
Bandwidth |
8.8Gbps (Non-blocking) |
MAC |
4K |
Forwarding Rate |
6.546Mpps |
LED |
PWR, PoE, Link/ACT |
Power |
Input 440W, 48D VC / 9.2A Each port up to 30W 100~240V AC/ 50-60Hz |
Dimensions
|
440L x 290W x 44H |
Weight |
4.5 kg |
Environment |
Work within 0°~40°C, Storage within -40℃~70℃ Work within 10%~90% Non-condensing, Storage within 5%~90% Non-condensing |