POE-S104TG, 4 Port PoE Gigabit high power PoE Switch, which reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This unmanaged switch offers four Gigabit PoE ports which supply 30 watts power each port for connected devices such as CCTV IP Network Camera, Wireless Access Point, VoIP Phone, Portable Device, etc.

This 4 Channel PoE Switch is rack mountable and powered by built-in Power Supply adapter. Base on Auto sensing technology, it delivers 30W power to IEEE802.3at compatible PoE-Enabled devices. However, It reduces about 15% energy consumption when the PoE switch is in Idle condition. Total amount 10Gbps highly improve the office efficiency and avoid network congestion. There are also LED indicators shows the operating status of connected device, which also improve troubleshooting.

Main Features
1. IEEE 802.3at Power over Ethernet (PoE) compliant
2. Supports 10/100M/1000bps fast Ethernet
3. 4 x Gigabit Auto-MDIX PoE ports
4. Built-in power supply
5. Provides up to 30 watts power for PoE
6. Automatically detects the PoE class level of a Powered Device
7. 10G Backplane bandwidth
8. Forwarding rate: 1000Mbps/1488.00pps, 100Mbps/148,800pps, 10Mbps/14,880pps
9. Status LEDs: System Power, PoE, 1000 Mbps, and Link / Activity
10. Full wire-speed non-blocking reception and transmission
11. Store-and-forward switching method
12. Back pressure Flow Control for Half-Duplex mode
13. IEEE 802.3x Flow Control for Full-Duplex mode
14. Power saving technology powers down unused ports that connected device are in standby mode
15. Plug and Play
16. Sturdy rack mountable metal case
17. Easy installation and use, no need to convert by software and network protocol

Detailed Specification
Item: 4 Port Power Over Ethernet Switch (25W POE)
Model: POE-S104TG
PoE Power: Pin 1,2 power "+"; Pin 3,6 "-"
Protocol Standard:
IEEE 802.3 10Base-T;
IEEE 802.3u 100Base-TX;
IEEE 802.3ab 1000Base-T;
IEEE 802.3af Power over Ethernet (PoE);
IEEE 802.3x Flow Control