POE-S2016GFB (16FE POE + 2GE Uplink, 150W/300W Built-in Power, 16G Bandwidth, IEEE802.3af/at)
Overview
POE-S2016GFB is 16 ports 10/100Mbps unmanaged Power over Ethernet switch with 2 port Gigabit RJ45 uplink, complying with IEEE802.3af/at and equipped with 150W/300W internal power supply source, which enables it compatible with lots of powered device such as VoIP Phone, IP Camera, Wireless AP, Intelligent Access Control, Portable device, etc.
Every single PoE output power up to 30W max and goes through pins 1,2 "+" and pins 3,6 "-" over standard Ethernet cable requiring Cat5 least, and Cat5e, Cat6, Cat6e or those in higher quality that will greatly reduce power loss in the transmission especially for the Ethernet power system that has a long distance between Power Source Equipment(PSE) and Powered Device(PD).
There are two different system modes (Free communication, VLAN port isolation) switchable in front panel of the PoE Switch in accordance with different conditions or requirements.
Key Features
Specification
Item | 16 Port FE&GE(10/100Mbps&Gigabit) Power over Ethernet Switch | |
Model | POE-S2016GFB (150W) | POE-S2016GFBE (300W) |
Interface | 15 FE PoE Output + 1 GE PoE Output + 2 GE RJ45 Uplink | |
Power Input | AC100-240V, 50/60Hz | |
Power Output | DC48-57V, 150W/300W Internal power supply, Max 30W single port | |
Data Exchange | POE: 10/100Mbps/Gigabit, Uplink: 10/100/1000Mbps, Store and Forward | |
Power/Data Assignment | Power: pin 1,2 ”+”, pin 3,6 ”-”; Data: pin 1,2,3,6 | |
Bandwidth/MAC | 16Gbps, 4K | |
Ambient Environment | Operating temperature: 0~40℃ | |
Storing temperature: -40~70℃ | ||
Operating Humidity: 10%~90% RH, No condensing | ||
Storing Humidity: 5%~90% RH, No condensing | ||
Protocol Standards | IEEE 802.3 IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3af/at IEEE 802.3x IEEE 802.1q VLAN | |
System Modes Setting | D: Default normal free communication among all ports, apply to universal data exchange, 100-150m transmission distance. | |
V: 1-16 PoE Ports VLAN isolating from each other, effectively restrain broadcast and multicast storm, ARP virus and other network failure; Apply to wireless AP and other equipment. | ||
Data Speed | Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gigabit Ethernet 2000Mbps full-duplex | |
Network Media | 10Base-T: Pair 2 Category 3(Cat3) and above UTP/STP(≤150m) 100Base-TX: Pair 2 Category 5(Cat5) and above UTP/STP(≤150m) 1000Base-T: Pair 4 Category 6(Cat6e) and above UTP/STP(≤150m) | |
Safety Approved | CE, FCC, ROHS | |
Warranty | 1-3 years | |
Size/Weight | Net Weight: 2.6/3.2kg (150W/300W), Gross Weight: 2.8/3.5kg (150W/300W) PoE Size: 285*220*45mm (L*W*H) Packing Box Size: 410*280*95mm (L*W*H) |
Application Diagram