PROFILE

FT346 is a low-viscosity ketimine resin characterized by high strength, long working time, and rapid curing under high humidity conditions. This product behaves similarly to polyamines and can be used as a curing agent for isocyanate prepolymers and epoxy resins. It can also serve as an active diluent in conjunction with polyaspartic esters, reducing the viscosity of polyaspartic polyurea coatings during application, extending the pot life, and enhancing the mechanical properties of the coating film.

PROPERTY

• Product viscosity is low, used in coatings have a long pot life.
• Encountered water dissociation , releasing ketones, unblocking primary amines to participate in the reaction. Fast curing for coatings in high humidity environments.
• Chemical corrosion resistance and good mechanical properties.

APPLICATIONS

• As a reactive diluent, it is used in polyaspartate system to reduce viscosity, increase solid content and prolong pot life.
• Can be used as a latent curing agent in epoxy systems.

INDEX

PACKING

180 Kgs/Drum, 9 Kgs/Drum

SHELF LIFE

• FT346 should be stored in a cool, ventilated, dry warehouse away from fire sources and protected from direct sunlight. Do not mix and store with other flammable, explosive, strong acid, strong alkali, strong oxidizing agent and strong reducing agent.
• As long as the above storage and transportation conditions are met and the product is intact and unopened, the shelf life of the product is 6 months from the date of production. Products that have exceeded the effective storage period shall be inspected according to the requirements specified in this standard. If the results meet the requirements, they can still be used.

Note: This manual is for reference only, without any warranty. In view of the limitation of resin function and the diversity of user requirements, please strictly test the adaptability of the product and the stability of the final product. The technical information is subject to change without prior notice.

Learn polyaspartic knowledge: Polyaspartic FAQ