PS9500 Polyaspartic Polyurea Elastic Flooring Finish

^{PS9500 Elastic Polyaspartic Polyurea Finish is a high-grade coating researched by Feiyang Novel Materials, mainly applied for waterproofing and protection for concrete surfaces; the main ingredient is improved amine active aspartic ester double component polyurea; Feiyang Chemical produces all raw material.PS9500 is mainly used in waterproof finish for Jinghu High railway waterproof project. Feiyang is the only producer of highway waterproof finish and raw material, passing through authorized inspection by the Chinese Ministry of Railway. This technology is leading all over the world.}

^{Product Performance}

^{● Good weather resistance: can stay no yellow by long-term QUV irradiation, can use outdoors for a long time;}

^{● High elastic: Elongation 250-400%;}

^{● High tensile strength: 25-30MPa；}

^{● Good Anti-chemical stability can be anti-acid, anti-alkali, anti-salt mist, anti-acid rain;}

^{● Colorful color can be decorative waterproof coating, exterior architecture coating, high anti-abrasion floor coating;}

^{● Good adhesion for the Substrate.}

^Application

^{● Concrete substrate weather resistance waterproof finish for the high railway, road, bridge, channel, dam, and seashore projects;}

^{● Elastic, anti-abrasion, weather-resistant finish for the outdoor floor;}

^{● Anti-corrosion, waterproof, weather-resistant finish for the vessel, vehicle, and mechanical equipment;}

^{● No crack architecture exterior coating, which can replace fluorocarbon coating, incredibly elastic and anti-abrasion that fluorocarbon coating does not have.}

^{Waterproof Project case}

^{●Jinghu High Railway Waterproof Project(1318km).}

^{●Wushi High Railway Waterproof Project.}

^{●Hada High Railway Waterproof Project.}

^{Technical Indicator:}

^{Application method}

^{● Polyaspartic Polyurea fninish: PS9500, Elastic Curing Agent: SP-103P, Thinner=100:100,appropriate quantity, spraying or brush, within 2hours.}

^{●When temperature is lower than 15℃, stop SP-103P elastic curing agent, change cold curing agent SP-103.}

^{Construct Procedure}

^{● Polyasaprtic Polyurea Waterproof coating construct procedure: Concrete pouring—maintain—substrate treat—thick cement mortar hard waterproof film—brush dedicate primer agent—brush polyurea elastic middle waterproof coat—brush polyurea waterproof finish.}

^{● Polyaspartic Polyurea Exterior wall coating construct procedure: concrete maintenance—thick scratch putty one time—fine putty second time—Oil primer one time—Polyurea middle coat and finish.}

^Cautions

^{●Temperature needs to be above 5℃ dew point when constructing substrate.}

^{●Construct side needs to be ventilated, with no smoke and light.}

^{●Workers must have safe protection, wear protective glass, gloves, respiration, and labor insurance articles, and avoid touch and intake coating mist.}

^Package

^{●Coating component 20kg}

^{●Curing agent component 10kg}

^{●Product is dangerous flammability chemical; it should keep away from the hot source, insulate the fire source, and avoid}

Learn polyaspartic knowledge: Polyaspartic FAQ