12 Mesh 0.6mm Plain Steel 48" Wide Carbon Steel Plain Steel Wire Mesh

Material: Stainless steel, phosphor-bronze, nickel, low carbon steel, copper, brass
Wire Diameter: 0.017-2.03mm
Weave Style: Plain weave, Twilled weave, Dutch weave
Roll width: 0.9144m,1.05m,1.22m,1.524m,1.83m (3', 3.5', 4', 5', 6')
Length: 30.5m or as requested
Sample: Available
Mesh size: 1x1-635x635mesh/inch
Certificate: ISO9001-2008

FAQ about our plain steel wire mesh
1. Are you trading or manufacturing?
We are factory with more than 200 employees, which convers an area of 65,000 square meters.
2. What are your strong products? How?
Strong products include stainless steel wire mesh, filter discs, epoxy coated wire mesh.
We have our own equipment facility to produce and process above mentioned products.
We can take good control of quality ourselves without any outside processing where rough-handling is always existed.
3. How Long is the delivery time?
It depends on quantity and specification, normally 7days for ready stock and 30days for the goods to be produced.
4. Is sample available? Free or not?
Sure, certain number of free samples are available after confirming all the specification details.

Production process for plain steel wire mesh
1. Raw material checking - Test wire diameter, wire mechanical property and chemical composition.
2. Wire Warping - Roll the wires all over the bobbin creel which is part of weaving machine.
3. Mesh Weaving - Get the weaving machine started to work
4. Quality Inspecting: Check if mesh surface and specification conform to the custmer requirements.
5. Epoxy Coating: Take electrostatic powder coating
6. Quality rechecking: Check if the situation of hole blockage exist
7. Edge Cutting: Cut the extra edge off
8. Packing - Put the mesh roll to the certain package and then store in the finished product warehouse.

Outer package available (same inner packing: water-proof paper and pvc bag):
1. Plastic woven bag 2. Wooden case 3. Wooden Pallet

We finished above mentioned products using our own equipment facility, so on basis of competitive cost, quality can be under good control without any rough-handling which is always existed in the outside processing plant.

If you have any inquiry for the plain steel wire mesh, please feel free to ask.