SHARE nylon monofilament filter mesh is made with a single filament weave, providing excellent fabric strength and uniform openings. Our nylon monofilament filter mesh is available in a wide range of options, including micron ratings from 3 to 2500um, open area from 1% to 67%, thread diameter from 30 to 1000um, mesh count from 6 mesh/inch to 700 mesh/inch, and thickness from 50um to 1900um.

Precision Nylon Monofilament Filter Mesh

• Monofilament nylon 6 fiber
• Precise micron rating and open area
• Micron rating 3 to 2500um are available
• Open area 1% to 67% are available
• Working temperature up to 115ºC
• Good abrasion resistance and low coefficient of friction
• Good resistance to alkalis and common solvents
• Limited strong acid resistance
• Roll length: 30-100 meters or customized
• Roll width: commonly in 100cm, 127cm, 150cm, 170cm, 200cm, 300cm on stock. Customized widths upon demand
• Available in roll, disc, tube, ribbon, bag and plastic molded filters
• Compliance with food grade
• Reach Svhc, SGS RoHS, US California Proposition 65 certificate

Applications

Nylon mesh has the features of non-toxic, odorless, anti-aging, high strength, large elongation, elastic, good wear resistance, high temperature resistant, resistant to decay, oil resistance, corrosion resistance, alkali resistance, chemical stability, electrical insulation, good anti vibration and sound, certain flame retardancy, SHARE precision woven nylon filter mesh fabrics meet stringent technical requirements in automotive, medical, industrial & chemical processing, and water treatment applications.

Typical application examples by SHARE customers:

insert molding filters, paint filters, automotive filters, air purifier filters, air conditioner filters, circulating & waster water filter , cell strainer, blood filter transfusion , wound care, injector filtration, coffee filter, biopsy bag, milling mesh, test & sample sieve, filters for agricultural instruments, filtration of powder and liquid chemicals, etc.

Nylon Monofilament

• Excellent diameter control for precise openings
• High flow rates and low pressure drops
• Filtration by surface particle capture
• Excellent surface particle release, easy to clean
• High degree of stiffness

Plain Weave

Plain weave is made by passing each weft thread or filling thread over and under each warp thread. Think of threads like tiny strings. Warp threads go up and down, and weft go side to side. When the threads are equal in thickness and number, the holes in the fabric are square. This happens in fabrics made from monofilament thread, ensuring the mesh opening precise and even.

SHARE plain weave nylon woven mesh is woven by 100% monofilament yarn. In plain weave constructions the straight-through pores of monofilament fabrics offer minimal flow restriction and surface loading of particles.

Your Benefits

• Free samples
• Wide range of filter materials(mainly in nylon, polyester, polypropylene, stainless steel) and micron sizes available
• Supplied in the form of rolls, pieces, shapes, ribbons, tubes, bags, plastic molded filters
• Decades of filtration manufacturing expertise and experience support
• Customization, full traceability, consistent reliable performance and lot-to-lot accuracy
• Precision uniform mesh opening and clean smooth surface
• High flow rates and low pressure drop
• Custom cutting and molding service, tight tolerances
• Unlimited shapes, non-fraying sealed edges
• 2 days or less lead time

Technical Datasheet

The data are compiled to the best of our knowledge.
Subject to change without notice.
Complete product range is available on request.

Company Profile

For mesh rolls:
1. Rolled on the paper core, 30-70m/roll, packed into PE bags, the product label is attached on the edge of each roll
2. 2-8 rolls per standard export carton
3. Put into PP woven bag to prevent damage during transportation
4. Package belt strengthen

For fabricated & molded filters:
1. Packed into sealed PE bags, 10pcs to 500pcs/bag according to the actual size, double bagged and the product label is attached in the inner bag
2. Put into bigger PE bag and then standard export carton
3. Wrapped the outer carton with PE stretch film to prevent damage during transportation
4. Package belt strengthen if pallets are available

The label contains the following standard information:
item name, manufacturer, material, dimensions, manufacturing date, order number, batch number etc.

FAQ

​​1. Where is your factory located? How can I visit there?

We are in Taizhou city, Zhejiang province China. By train, we are one hour away from Hangzhou and two hours away from Shanghai.

2. Can I get free samples and how long can you deliver them?
We are pleased to provide you with free samples for your evaluation, which will be sent to you within 2 days. Please feel free to reach out to us for samples.

3. How long does a quotation take?
In most cases, we respond within 2 days. If something in RFQ need be confirmed, we will promptly notify you soon.

4. How quickly can I get my order finished?
The production lead time is dependent on the quantity. Typically, it takes 5 to 15 working days for us to complete mass production once you have placed the order.

5. What about your quality control?
By visual inspection, optical or pressure sensitive equipment and automated 3D image-inspection equipment, our production operators conduct self-inspections at every stage of the process. Additionally, we have spot inspections and final inspections carried out by our Quality Control (QC) team.

6. What's your largest advantage?
One of our core competencies is our excellent converting capabilities from yarn over weaving to converted items with professional technical team and quality guarantee and management for more than 30 years.

7. What kind of payment terms do you accept?
T/T and LC and more.