One Way Endless Webbing Sling Single Eye For Lifting Steel Pipe And Tubing

WLL 1000KG

Width 50mm

Color White

Certification CE GS TUV ISO

Safety Factor 7 to 1 , but we can make 5 to 1 as well.

Package Binded with belt and outer carton, Pallets 20 Pallets per 20 feet container

1 100% high tenacity polyester fiber. Double A Class raw material fiber

2 100% polyester sewing thread

3 Blue label with client's logo, serial number and plastic coat

Material
Polyester is resistant to moderate strength acids but is damaged by alkalis; polyamide (Nylon) is virtually immune to
alkalis but is damaged by acids; and polypropylene is little affected by acids or alkalis but is damaged by some
solvents, tars and paints.

Warning:

The slings should avoid the harm of the sharp instrument when lifting the goods.
Never use slings with damages or defects.
Forbidden to tie a knot of the sling or link with a knot. You should link the sling with the right connecting piece.
Only use slings with clear identifications.
Before use,check working load limit, length and working position.

Inspect slings each day before use, looking for:

Missing or unreadable ID tag
Melted, charred or weld-splattered areas
Acid or alkali burns
Holes, tears, cuts, snags or embedded particles
Broken or worn stitching
Excessive abrasive wear or elongation
Knots or brittle areas
Broken, corroded, pitted distorted fittings

Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.

Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;
damaged or deformed end fittings.