3 Ton High Quality Double Eye Webbing Sling Flat Webbing Sling Webbing Sling For Lashing

• WLL 3T
• Width 75mm or 90mm
• Length As client request
• Colour Yellow
• Standard EN1492-1 2000
• Certification CE GS TUV ISO
• Safety Factor 7 to 1, and we can make 5 to 1, 6 to 1 and 8 to 1 as well.
• Package Film shrinked with outer carton and Pallet 20 Pallets per 20 feet container

1 100% high tenacity polyester fiber. Double A Class raw material fiber

2 Double Plies slings. Of course , we can make one ply, three plies and four plies as well.

3 With reinforcement on lifting eyes.

4 100% polyester sewing thread

Eye-Eye webbing sling is made from high tenacity 100% polyester webbing with reinforced eye loops at both ends.It can be made from one layer to four layers, which we usually call Simplex webbing sling, Duplex webbing sling, Triplex webbing sling and Quadraplex. And the eyes can be made into Flat eyes, Twisted eyes and Reversed eyes. Eye-eye webbing slings are versatile as they can be used in choker, vertical, or basket hitches.Polyester fabric has low elongation, so it’s better able to hold the load without the risk of shocking.OEM service is also available.

Inspect slings each day before use, looking for:

• Missing or unreadable ID tag
• Melted, charred or weld-splattered areas
• Acid or alkali burns
• Holes, tears, cuts, snags or embedded particles
• Broken or worn stitching
• Excessive abrasive wear or elongation
• Knots or brittle areas
• Broken, corroded, pitted distorted fittings
• Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.

Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical

solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the

following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,

chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;

damaged or deformed end fittings.

Our Services

1. Client

We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.

2. People

We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.

3. Product

Our products are of high quality standards and always come with certificate of compliance by the manufacturers.

4. Performance

We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.

5. Free sample and OEM service

We can provide free samples to you and we also have OEM service, we can put your.