Application:
PVC TI3 compounds are RoHS compliant and UL listed. All properties meet TI3 standards of EN50363-3 and DIN VDE0281. These compounds complies wit DIN VDE standards for 90°C grade insulation materials.
PVC compounds are often used for electrical cable jacketing due to its excellent electrical insulating properties, physical properties in both low and high temperature, and dielectric constant. PVC compounds are commonly used in low voltage wire & cable (up to 10 kV), telecommunication lines, automotive wires other electrical wiring.
1.Technical Specifications
Item | Unit | PVC TI3 | Test Method | |
Standard | Typical Value | |||
Density | g/cm3 | — | 1.37 | ISO1183 |
Hardness(Shore A,15s) | — | — | 91 | ASTM D-2240 |
Tensile Strength | MPa | ≥15 | 19.86 | IEC 60811-1-1 |
Elongation at Break | % | ≥150 | 240 | IEC 60811-1-1 |
After 136℃×336h heat aging | IEC 60811-1-2 | |||
Tensile Variation | % | ≤±25 | +11 | |
Elongation Variation | % | ≤±25 | -11 | |
200℃ Heat Stability | min | ≥240 | >300 | GB T 8815 |
115℃×240h TG | Mg/cm² | ≤1.5 | 0.31 | IEC 60811-3-2 |
150℃×1h Heat Shock | - | No Crack | No Crack | IEC 60811-3-1 |
90℃×4h High Temperature Indentation | % | ≤50 | 20 | IEC 60811-3-1 |
Volume Resistivity | Ω cm | ≥1E+14 | 4.00E+14 | IEC 60167 |
Dielectric Strength | KV/mm | 20 | 25 | IEC 60243 |
Technical specifications of 70 ℃ pvc compound
|
3.Process: extrusion
4.Appearance: cylindrical particles, plastication should be good, the color and luster is even, without obvious impurity.
5.color: Black and white, gre for Shealthing PVC compound
Red, Yellow, Blue, White and black for Insulation PVC compound
6.Packing: Jumbo bag, 18-20 Tons per 20GP, 26 -27 Tons per 40GP
7. Transportation and storage:
After unpacking should be run out as soon as possible, or temporarily stored in sealed containers,
to avoid the absorption of moisture in the air
Store in a well-ventilated place, away from direct sunlight
Keep away from heat, ignition sources, combustibles and incompatible materials
The storage area must be cleaned and properly structured to avoid dust accumulation
8.Factory Introduction:
Our factory is located in Shangyou industrial zone, Shangyou country,Ganzhou city,Jiangxi province, and setting up sales office and warehouse in Dongguan city. The new and standard factory is built on 40,000 sq. mtr with a total annual capacity of approximately 10,000 tons of various products,covers 2 flame retardant production-line, 7 cable filler yarn production-line,32 twisted machine, with full modernization of testing equipment. All of the products can be exported freely.
The company has passed the ISO 9001:2008 quality system certification. Each of these products can reach to environmental requirement by SGS company: such as ROHS, REACH-SVHC, Halogen Free. More than 30% of products are exported to Europe, America, Japan, Southeast Asia and Africa, having cooperation with many well-known listed companies at home and abroad.
We always sincerely welcome any domestic and overseas customers with great enthusiasm.
9.How To order :
1. Let me know the models, specification, quantities, colors you want to order
2. We will email you the Proforma Invoice based on your order information
3. Kindly check the PI, everything is ok, we will start production as soon as receiving payment deposit or LC, then
deliver the goods on request, original documents will be send against full payment