Flame Resistant 0.08-0.25mm Fiberglass Tape for power and control cables

Product Description

Longtai Flame Retardant Fiberglass Woven Tape uses pure E-Glass material, which can resist flame, is environmentally friendly and free from asbestos. Fiberglass Tapes are widely used for power and control cables, instrumentation and signaling cables due to its excellent flame resistance. Since Fiberglass Tape is high flexible and has high tensile strength it can be easily applied with high speed standard wrapping equipments.

The color of fiberglass cable tape is white

Spool package, the fire retardant glass fiber tape width can be custom made.

Common width is 15mm , the maximum outer diameter can be 800mm

Properties of Fiberglass Tapes :

• Exceptionally high dielectric strength
• High tensile strength
• Strong resistance to radiation, acid and alkali
• Non-toxic under high temperature
• Excellent flexibility
• Heat resistance up to 950℃

Available Specifications:

Width: 15, 20, 25, 30, 40mm
Length: 800m (No Joint)
Core ID: 76mm

Technical Parameters

Product Show

Packaging

The product will be packed in paper carton with PE film bag and bubble paper inside. It is then sealed and inserted in a wooden case or packed on a wooden pallet. After it is fixed, an external plastic coversheet is wrapped around it to avoid water penetration.

Storage Information

The product has a shelf life of 12 months from production date if stored in unopened original packages, under dry and clean conditions at temperatures between 10-30°C. The product will be damaged if it is stored in a moist area or if it gets in contact with water.

1) The product shall be kept in a clean, dry and ventilated warehouse.
2) The product should not be stacked together with flammable products and should not be close to fire sources.
3) The product should avoid direct sunlight and rain.
4) The product should be packed completely to avoid moisture and pollution.
5) The product shall be protected from heavy pressure and other mechanical damage during storage.
6) The storage period of the product at ordinary temperature is 6 months from the date of production. More than 6 months storage period, the product should be re-examined and only used after passing the inspection.