High Air Ventilating Plastic Material Dryers Stable Low Dew Point Heatless Energy Saving

Descriptions :

EMDE series combines dehumidifying, drying and loading into one unit. Heatless regenerator of dehumidifying and drying can provide with dry air with lower dew point. Users can freely chosen needed air flow rate, temperature, drying time and dew point value etc. according to real production demand. The self optimization and adjusting of regeneration temperature achieves energy-saving and environment-protection, which saves above 60% energy compared with traditional models.

Dew point values of drying can reach -70°C, drying barrel capacity is 5-6000kg, can meet the production demand of different environment and dosage.

ENM-Intelligent two-channel P.I.D. self-optimized temperature controller and unique energy and airflow management software, can real-time, intelligent, accurate control and self-optimized working state of whole machine to reach energy saving and environment protecting. Dew Point monitor is optional, convenient to monitor dew point at any time.

Small size of whole, high effect working performance features good dehumidifying effect and high air ventilating can provide stable low dew point dry air for system, with energy saving and heat preservation drying material barrel, the surface temperature of drying material barrel is below 40°C when drying temperature reached 180°C, hermetic system control to achieve efficient use of energy and decrease unnecessary consumption of electric energy.

The hot air recycling system can avoid environment be polluted by exhausted air, with shut-off suction box can make sure no vestigital on pipe when conveying.

Hermetic circulatory system can prevent dried material from moisture regaining because of outside contacting.

Drying air can evenly upward diffusion from barrel bottom to ensure drying air can evenly dry material that after dehumidified, achieve steady and rapid dehumidifying and drying if raw material.