Peak Season Lead Time: within 15 workdays, Off Season Lead Time: within 15 workdays
Payment Terms :
T/T, L/C
Description
Polymer polyol VPOP-45
Introduction
The VPOP-45 Mainly used for high load-bearing polyurethane,high-resilience block flexible foam,molding flexible foam,integral skin flexible foam and semi-flexible foam etc. Specification
Test project
Unit
Indication range
Appearance
Milky white viscous liquid
Solid content
%
44-47.5
OH Value
mgKOH/g
28-32
Misture
%
≤0.08
Viscosity
mPa.s,25ºC
4000-5500
Packing
200KGS DRUMS,FLEXIBAG
Handling Precautions Flash point is above 200ºC(open cup method), flammable but non-explosive. In case of fire, put out with foams, dry powder, steam or water. It is almost non-toxic, and the steam can irritate the eyes. When inhaling the steam, it can cause headache, loss of appetite, vomiting and other skin stains, and then wash with soap and water. When the eyes touch, wash with low-pressure water or consult a doctor. If skin contact occurs, wash exposed areas thoroughly with soap and water.
Storage
Recommended storage temperature (ºC):10-35 Shelf life (ex-works)12 months if stored in sealed, moisture-tight containers. Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Product tags
Send your message to this supplier
Send Now
Submission successful!
VPOP-45 Solid Content 44-47.5% Polyurethane Polymer Polyol and TDI for Flexible Foam