Stainless steel material swimming pool starting platform blocks
Equipment features:
1). Swimming pool starting platform appearance must meet the requirements of FINA. For example: installation swimming pool starting platform surface need to higher than 50-70 cm above the surface of the water, the starting board at least 50 cm square meter, the forward tilt is <10ordm.
2). Diving platform technical need meet requirements of the provisions of FINA. For example: the handshake must be designed in the fron of diving platform and higher water surface 30-60 cm. the starting handshake is on the same vertical surface. The horizontal grips are parallel to the horizontal plane and the vertical grip is perpendicular to the horizontal plane. The starting edge of the forefront of the thickness of not more than 4 cm, or both sides of the starting table at least 10 cm long front at least 40 cm long into the body 3 cm handshake slot.
3). The starting station material need durable, not rust, no corrosion, and diving platform is non-slip material, mark clear Arabic numerals around diving platform.
4). The starting block panel is made of ABS and conforms to international standards. The surface is anti-slippery. The sustaining bracket underneath is made of 304 stainless steel, which is durable and strong.
5). The starting block measures up international standard. Made of ABS,skid proof surface,standard size,high quality.
Type | Standard swimming pool starting block |
Size | 500*500*400mm |
Step | One step starting block |
Material | Stainles steel and FRP |
Feature | UV protection, skid resistance, easy install, detachable |